User Manual

 Follow the instructions in your Owner’s Manual to remove the seat and/or any other

components (side covers, etc.) necessary to provide access to the battery.

WARNING!

To prevent accidental vehicle start-up, which could cause death or serious injury,

disconnect battery cables before proceeding.

WARNING!

Disconnect negative (-) battery cable first. If positive (+) cable should contact ground

with negative (-) cable connected, the resulting sparks can cause a battery explosion,

which could result in death or serious injury.

PAGE 1
 Follow the instructions in your Owner’s Manual to remove the seat and/or any other components (side covers, etc.) necessary to provide access to the battery. WARNING! To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect battery cables before proceeding. WARNING! Disconnect negative (-) battery cable first.
PAGE 2
 Install the positive (Red) ring terminal on the harness to the positive (+) battery post.  Attach the negative (Black) lead on the harness to the negative (-) battery post.  Connect the SAE Dual-Pin connector from the Cell Phone Adapter to the SAE DualPin connector on the Battery Harness.