Operation Manual

Functions

Clock:

Memory function will record the time of measurement to help recognize

individual measurements. (12/24 format for hour, minute & date available)

• See “Clock setting” section for set-up of time when rst used.

Room temperature:

A suitable room temperature is important for adults and babies. The

thermometer recognizes the room temperature.

• See “Clock setting” to enable this function. When turned o,

thermometer shows the room temperature with icon.

• See “Use of the thermometer” to learn how to get the room temperature.

Ear temperature:

The thermometer is designed for practical use and should not replace a

visit to the doctor. Always compare measurements with your regular body

temperature. This seems a strange sentence to have here. It has nothing to

do with the ear temperature.

• See “Use of the thermometer” to learn how to measure body

temperature in the ear.

Scan mode:

The scan mode shows a surface temperature which is dierent from the

body temperature. It is useful to monitor the temperature of an object

such as baby’s milk.

• See “Use of the thermometer” to learn how to measure the

temperature of an object.

Stopwatch:

This function is useful for measuring heartbeat.

• See “Use of the thermometer” to learn how to use the stop watch

function.

Fever alarm:

If the thermometer detects a body temperature of more than 37.5°C

when measuring by the ear or forehead, there will be a long beep sound

followed by three short beep sounds which warn of potential fever.

Memory:

There are totally 9 sets of memories for ear and forehead measurements.

Each memory also records, together with the measurement, the date,

time, mode and site location.

• When switched on, press the ON/MEM button to recall the

temperatures stored with the icon.

°C / °F switch:

When the thermometer is turned o, the LCD displays the date, time and

room temperature. Press and hold the “SCAN” button and then

immediately press and release the “ONMEM” button. After 3 seconds the

icon °C will change to °F. The same procedure to change back to °C.