User's Manual

ManualsBrandsEKSA ManualsAudio EquipmentGaming Headset

User Manual

Headphone parameters

Launcher parameters

working voltage

55mA

working voltage

68mA

working current

3.5-4.2V

working current

Libattery capacity

500mA

Frequency range

5.8GHz

Continuous working hours

8hours

Transmission power

8dBm

charging hours

2hours

Transmission distance

10meter.360°

frequency range

5729MHz~5849MHz

Receiving frequency

-85dBm

Transmission power

3dBm

Receiving frequency

-85dBm

Speaker diameter

Φ40mm

Speaker impedance

20ohm

Speaker frequency response

20-20KHz

Microphone specification

6*2.7mm

Microphone sensitivity

-42DB

Microphone direction

Sigle direction

Microphone frequency response

100-10KHz

A： short press microphone mute (need prompt sound) B： power switch key-long press control

switch machine, short press switch ENC 7.1 function C： volume adjustment knob D、TYPC-

mouth telescopic microphone after boot ear shell light long light.

Introduction:

To connect the wireless USB adapter to any USB port on the PC that can work properly, or to

connect the USB extension line without installing any driver,

Notes:

USB adapter, restart headset, and then automatically connect, this product is a one-to-one pair of a

single product, if not paired, please boot state press the key to open the code button 3-5 seconds

until the headset blue light is always on, The emitter blue light is always on, that is, the code is

successful.

By using the USB extension line, the transmitter can be placed in the best receiving position, thus

expanding the receiving range of the wireless headset, which is designed to operate within the

maximum distance of 40 feet (12 meters) of the wireless transmitter. But other wireless devices

close to or under environmental conditions may affect performance.

Summary of content (3 pages)

PAGE 1
User Manual Headphone parameters Launcher parameters working voltage 55mA working voltage 68mA working current 3.5-4.2V working current 5V Libattery capacity 500mA Frequency range 5.8GHz Continuous working hours 8hours Transmission power 8dBm charging hours 2hours Transmission distance 10meter.
PAGE 2
Ear wheat state LED indication： USB adapter LED indicator： Blue flash = signal search, Blue Flash = Signal Search Blue light flashes slowly = battery power is low Blue lights on = code connection successful (horn beep) A red light is on = is charging A red light = full Important Tips: 5.8 G Wireless headset Wireless headset must be charged before first use * Connect the USB charging line to any USB port on the PC that can be used normally. :: Connect the USB charging line to G 2.4 wireless headset. 5.
PAGE 3
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.