User's Manual

Ear wheat state LED indication：
USB adapter LED indicator：
Blue flash = signal search,
Blue Flash = Signal Search
Blue light flashes slowly = battery power is low
(horn beep)
Blue lights on = code connection successful
A red light is on = is charging
A red light = full
Important Tips:
5.8 G Wireless headset Wireless headset must be charged before first use
* Connect the USB charging line to any USB port on the PC that can be used normally.
:: Connect the USB charging line to G 2.4 wireless headset.
5.8 G Wireless headset There is no "memory effect" on the wireless headset, so there is no need
required before recharging.
Charge when power is off
When 5.8 G Wireless headset the headset is closed and charged by connecting the USB line
Charge when power on "play and charge mode"
When 5.8 G Wireless headset headset is turned on and charged by connecting the USBN line.
For best wireless performance:
:: Place wireless adapters in accessible open areas.
:: Wireless adapters require active USB ports (100 mA)
For maximum battery life:
:: Ensure that batteries are charged before initial use
:: Do not allow the battery to remain fully discharged for long periods of time so that the battery
remains partially charged to maximize battery life
:: unplug the USB charging line immediately after the headset is charged
:: Place the headset at room temperature (20-30℃ or 68-86℃)
Important Tips:
Listening to things in high volume for a long time may damage your hearing. Take a break every
once in a while
And at the beginning, the volume should be as low as possible, and then higher.
Wear the headset on the head and adjust the headband to make it comfortable.