Datasheet

Alluring clarity: the FS 607 CE
The beautiful FS 607 CE speaker is a triumphant upgrade of the successful FS 607 X-JET that has garnered the
highest accolades all over the world. ELAC’s crystal membranes, woofers with LLD technology, downward-facing main
bass port, sound adjustment options, a massive new base plate with
professional spikes and a decorative aluminium rear panel all contribute to a
highly successful makeover.
The chief attraction: It is retrofittable with ELAC‘s renowned “4Pi” super
tweeter.
The listener is convinced by the fresh, crystalline clarity of the music rendition
and a precise, punchy bass that reaches up to 30 Hz. The finely resolved
sound, with its very precise directional definition and its verve and dynamism- as
well as its well-graduated sound depth generates pleasant spaciousness and an
unusually large optimal listening zone.
The elegant 3½-way stand speaker is comparatively independent of amplifier
input and is also suitable for sound production in larger rooms and at high
levels.
Technical features and characteristics
• Second generation X-JET:
- Optimized magnet system
- Internal design with
additional damping.
- New MT membrane design
with Nomex honeycomb
material /phenol cellulose
overlays and crystal membrane
• TT 180 AS-XR with crystal
membrane and titanium voice
coil former using proven LLD
technology.
• Provision for retrofitting with
4 Pi ribbon tweeter.
• Network for 3½- or 4½-ways
design: With 2 woofers for the bass range, in which the upper
woofer covers the midrange up to 550 Hz. Sophisticated filter
technology for perfect integration of all transducer systems.
Equipped with highest quality components such as MKP capacitors and metal oxide resistors exclusively
manufactured for ELAC. Internal wiring: Van den Hul cables. All components are installed on a total of 9 circuit
boards, which are in turn combined on a total of 4 PCB’s to facilitate installation, easily accessible for service
purposes via an aluminium rear panel.
• Ported with large BR tube rounded at both ends, with downward orientation (integrated in base plate).
• Additional 60-mm BR on rear side of cabinet (top). Sealed as standard with new 60-mm bass control plug. For
adaptation of bass reproduction to special set-up and room conditions.
• Switch terminal for setting the mixing ratio of the two tweeters (JET and
retrofittable 4-Pi tweeters) as well as the midrange.
• Sophisticated cabinet construction based on cross-frame hybrid technology with
streamlined extruded aluminium side sections, internally stabilized at multiple
locations with MDF matrix elements and 2 tensioning devices. The material mix
ensures that the speaker’s intrinsic resonance is extremely low.