Datasheet

2
• The FS 137 JET provides two
double flare bass ports on the
rear to reduce friction losses.
• Inserting the ELAC bass
control plug (delivered with the
product) into the rear bass port
will improve the bass sound
when it comes to critical room
conditions or when it comes to
the installation close to walls.
This results deep, dry bass
sound.
• Resonances of the cabinet are
avoided due to ring-shaped
reinforcements.
• High-quality terminals, with separate circuit boards for bass/midrange and
treble circuits, are easy to access, and allow larger cable diameters (16
mm
2
), as well as high-quality spade connectors (e. g. WBT products).
• The utilization of two bass drivers has resulted in a high efficiency system,
thus enabling the smaller amplifiers to be used. Built in overload protection
is a feature of the FS137 JET.
Finishes: Black
Specifications ELAC FS 137 Crossover Frequency 550/2500 Hz
Dimensions H x W x D 950 x 225 x 320 mm Nominal / Peak Power Handling 80 W/120 W
Weight 16 kg Frequency Range 35-50000 Hz
Type 2 1/2-way, bass reflex Sensitivity 89 dB/2.8V/m
Woofer 2 x 140 mm AS cone, magn. shielded Nominal Impedance 4 Ohm
Tweeter 1 x JET III, magn. shielded Minimum Impedance 3.5 Ohm at 230 Hz
Recom. Amplifier Power
at Nominal Impedance
30-180 W/channel