Datasheet

CC 180, the hi-fi centre in classic rack format
The CC 181 now follows the CC
180 as yet another centre speaker
in the 180 Series in a classic rack
format. With a width of 435 mm, it
fits into any standard AV set-up
(AV receiver, DVD player etc.).
Special attention have been paid
to the reduction of the height of
the cabinet. This have been
achieved by the use of the newly-
developed 135-mm woofer driver.
The reduction of the cabinet
height was done without any loss
in power and sound quality.
Acoustically, the CC 180 is a
perfect match to the other
members of the 180 Series. It is
characterized by a natural sound
with a substantial bass and very
balanced middle/high range.
Equipment, technical features:
• New 135 mm aluminum sandwich woofer with same performance as the well known 140 mm woofer used for
example in the FS 187.
• The crossover uses 2 ½-way technology for the widest possible listening zone.
• The JET III tweeter with its special neodymium magnet system and an upper cut-off frequency of 50 kHz.
Practical/other features:
• Centre speaker with height of only 158 mm in classic rack format.
• Bi-wiring (bi-amping) terminal enabling separate signals for high- and low-/mid-range.
• Cloth frame / metal grille fixed magnetically
• Natural sound, matching the standalone and shelf speakers of the 180 Series.
• Double chamfered bass reflex tube to minimise airflow noises.
• Internal cabinet bracing to minimize cabinet resonance.
• The impedance of 6 ohms means that the centre can also be connected to load-critical amplifiers or to
surround-sound amplifiers using class D technology without difficulty.
Colours: White matt finish, black matt finish, equipped with cloth frame and metal grille.
Specifications:
Dimensions: Height * Width * Depth 158 x 435 x 338/350 [mm] with/without grille
Weight approx. 8.5 [kg]
Principle 2 ½ way, bass reflex
Woofer
Bass reflex port
2 x 135 mm
1 x 45 mm (rear)
Ø AS cone, shielded
Tweeter JET III
Crossover frequencies of the filter 700 /2600 [Hz]
Nominal power handling 80 [W]
Peak power handling 110 [W]
Frequency range (as per IEC 268-5) 44 - 50000 [Hz]
Sensitivity 85.5 [dB/W/m]
Sensitivity 87 [dB/2.83V/m]
Suitable for amplifiers from … to 4 - 8 [Ω]
Nominal impedance 6 [Ω]
Minimum impedance 5.1 / 210 [Ω/Hz]
Recommended Amplifier Power at Nominal Impedance 20 - 170 [W/channel]