ARB-51 POWERED BOOKSHELF SPEAKERS ARF-51 POWERED FLOORSTANDING SPEAKERS OPERATING INSTRUCTIONS
Safety Instructions 1. General information • Please read and follow these safety instructions. • Keep them safe for future reference. • Observe all warnings on the speaker and in the manual. Please check the speaker for damage before use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury. 2. Use only as directed • Connect the speaker(s) according to the instructions in the manual. • Many ELAC speakers are equipped with spikes and/or anti-slip feet.
4. Overload • Extreme overload of the device due to very high volume may cause damage to individual components. Because of the possible danger, you should never leave loudspeakers under extreme overload conditions unattended. 5. Service DANGER! Do not open the cabinet because the components and conductors may carry current! Servicing to be carried out by qualified service personnel only.
Philosophy Thank you for purchasing this ELAC product. Since the time we started (1926), ELAC has always striven to achieve the very best. Your new ELAC speakers are built to the highest standards using high-quality components that are carefully constructed to deliver the best-in-class sound quality. They are developed by a passionate group of individuals whose sole purpose is to bring a new dimension of sound quality into your home.
Controls and Indicators 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. RCA Input — This connection is used to connect the speaker to your pre-amp/AV receiver with RCA connections XLR Inputs —This connection is used when your pre-amplifier features XLR balanced outputs.
Installing the base and spikes (AF-51 Only) Using the included outrigger plate provides a wider support base for the speaker cabinet and should be installed. The included spikes improve stability on uneven surfaces and thickly carpeted floors. Please use caution when dealing with the spikes as they are sharp. IMPORTANT: When using these spikes on hard surfaces such as wood or tile floors be sure to use the provided floor discs to protect your floor from damage.
Connecting the Speakers The Navis speakers can be connected three different ways Wired RCA Unbalanced, Wired XLR Balanced, or Wireless (AirX²). CAUTION—THE NAVIS SPEAKERS DO NOT HAVE A VOLUME CONTROL. IF CONNECTED DIRECTLY TO A FIXED OUTPUT SOURCE THE VOLUME WILL BE AT MAXIMUM LEVEL AND MAY DAMAGE THE SPEAKERS AND YOUR HEARING. ONLY USE WITH VARIABLE OUTPUT SOURCES!!! Connecting the Navis Speakers using wired (RCA or XLR) connections 1.
Making Adjustments The Navis speakers provide several adjustments to tailor the sound to your specific environment or taste. Use the below guide to aid it setting up. Please note these settings should always be set the same on both speakers (Except for the Left/Right switch when using the wireless input). Low Frequency EQ (LF EQ)—This adjustment allows you to decrease or increase the low frequency output of the Navis speaker to best match into your room.
AirX² Wireless Pairing Pairing the Navis Speakers with am AirX wireless transmitter is very simple. Please follow the below steps to complete the process. 1. Press and hold the Wireless Pair button on the Navis speakers until the LED begins to flash rapidly (Around 2 Filename: Discovery Connect Rear Panel Silk Rev D.cdr times per second). 1 Color: White 2.
Speaker Placement Achieve maximum performance and optimal sound quality from your ELAC Navis speakers with proper speaker placement and set-up. While not all rooms are the same, use the following guidelines to configure the speakers for your particular room. There are no “exact” rules or boundaries in setting up your speakers but the following suggestions will help optimize your desired results.
Stereo Setup • For the best results and the most realistic stereo image and lifelike sound, place the speakers so that an equilateral triangle (fig. 2) is created between the speakers and your favorite listening position. This set up creates the optimum imaging performance. • If you find that your Navis left and right speakers are too far apart, angle (toe in) them towards the listening position to gain a more focused central image.
SPECIFICATIONS Specs ARB51 ARF51 Speaker type: 3-Way Powered 3-Way Powered Tweeter: 1" Soft Dome Concentrically Mounted 1" Soft Dome Concentrically Mounted Midrange 4" Aluminum 4" Aluminum Woofer: 5-1/4" Aluminum 3 x 5-1/4" Aluminum Frequency Response 44Hz - 28kHz 43Hz - 28kHz Crossover Frequency 2.2kHz / 260Hz 2.
ELAC Americas Inc. North America Limited Liability Warranty Powered Speakers ELAC Americas Inc. warrants to the original purchaser that this product be free from defects and or workmanship for a period of 3 (Three) years on the cabinet and speaker driver and 1 (One) year on the amplifier from the original date of purchase. During this time period, repair or replacement of parts will be free of charge to the original owner (See below limitations).
ELAC AMERICAS LLC. ELAC AMERICAS INC. 11145 KNOTT AVE.E SUITES E &F 11145 KNOTT AVE. SUITES &F CYPRESS, CYPRESS, CA 90630CA.