Owner's Manual
Table Of Contents
Safety Instructions
1.
General information
• Please read and follow these safety instructions.
• Keep them safe
for
future reference.
• ObseNe all warnings on the speaker and
in
the manual. Please check the speaker for damage
before use. The speaker must be
in
perfect working condition. Damaged parts may lead to
personal injury.
2. Use
only
as
directed
• Connect the speaker(s) according
to
the instructions
in
the manual.
• Many
ELAC
speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for
levelling the speaker. For levelling on
an
uneven floor, unscrew the spikes
or
anti-slip feet
by
2-3
turns
of
thread. The speaker should always be in perfect vertical alignment: the stability
of
the
speaker must not be compromised by using spikes or anti-slip feet
as
the
speaker may tip-over.
3.
Location
• Install the speakers on a level surface only
• When choosing the location
of
these speakers
do
not place them
in
locations that are:
• In direct sunlight
• Very humid
• Prone to vibrations
• Exceptionally hot or cold
• Near
CRT
Televisions (the speakers are not magnetically shielded and may cause color
issues with a
CRT
based TV)
• Close
to
magnetic cards (Since the speakers are
not
magnetically shielded placing
magnetic cards such
as
credit cards
or
commuter cards may cause them
to
fail).
WARNING! Please ensure
the
product
is
perfectly
stab
le
to
avoid
injury
from
tip-over.
Please note, that stability can be increased
by
using spikes on carpeted surfaces. However, the
mounting
of
spikes must be carried
out
carefully due
to
their very sharp ends which may cause injuries.
The stability on slippery floors can be increased
by
using Velcro fastening tape
or
double-sided
adhesive tape. Do not install the speaker near any heat sources such
as
radiators, heating valves,
stoves,
or
other apparatus
(i
ncluding amplifier
s)
that produce heat,
or
in
areas where there is a risk
of
explosion.
• Do
not
block any ventilation openings. Install
in
accordance with the manufacturer's instructions.
• Do
not
install
the
speaker in a closed rack or in a closed cupboard.
• Do
not
put burning candles on or near the speaker.
• Do
not
in
stall the speaker near
tr
ansformers because electromagnetic stray fields can
ca
use hum
noise on woofers.
• In combination with certain materials
I lacquers I material surfaces, anti-slip feet or spike washers
may cause colored imprints on the surfaces.
ELAC Uni-Fi Speakers I www.elac.com I Page 2