Operation Manual

12
Preparations for installation
1.) This In-Ceiling loudspeaker is already fully assembled. To install
the loudspeaker, it is important that you take out the grille first.
Remove the front grille by means of the grille removal tool.
2.) You will now see the paint mask which allows you to cover the speaker unit when you want to paint the grille and
/ or the plastic frame of the speaker. Before putting the loudspeaker into operation the paint mask has to be
removed.
Installation
3.) Choose the place where you want to install your In-Ceiling
loudspeakers and take out the enclosed installation template.
Use the pencil to draw in the outlines of the loudspeaker.
4.) Alternatively you can draw a circle with a diameter of 200 mm.