Product Manual

Connecting your Subwoofer
The subwoofer can be connected to your home audio system using one of the two below options.
Option 1:
Connect the subwoofer to an AV Receiver or Pre-Amp with a dedicated subwoofer or LFE output using an RCA
cable (not supplied) from the LFE/Subwoofer output on the AV Receiver/Pre-Amp to the LFE IN on the subwoofer
(Fig 1).
Option 2:
Use the optional wireless transmitter (Sold Separately). Please follow the instructions included with the wireless
transmitter.
Note: Out of the box, the default settings of the subwoofer are:
- crossover 80Hz
- volume 75%
The default settings work in most of the applications. Use the app for advance settings of the subwoofer.
Controlling Your Subwoofer—App Required
Your ELAC subwoofer incorporates an advanced, digital control system. Conventional analog rotary
potentiometers and switches have been replaced by a digital signal processor (DSP), which enables you to
adjust your subwoofer conveniently and accurately. All parameters, such as volume, cut-o frequency, phase,
etc., as well as the automatic calibration functions, can be adjusted with the help of our free smartphone
application.
The digital control system also eliminates the possibility of unwanted changes to controls and settings.
Note: A Bluetooth 4.0 low-energy Android or iOS device is required to set up and operate this subwoofer.
You can download the “ELAC SUB Control 2.0” APP from the Apple® App Store® or Google® Play Store®.
Please note that your mobile device must support Bluetooth® Standard 4.0. This is the case for the majority of
devices sold as of mid-2013. If necessary, check the accompanying documentation for your mobile device or
contact the manufacturer’s support hotline.
Note: In case your mobile device needs a 4 digit code during the subwoofer-pairing procedure, please use
“0000”
ELAC SUB2010SUB2020 Subwoofer | www.elac.com | Page 6
AV RECEIVER
SUB
Line Level
Fig. 1