User guide

2.3.2.2 Software For Non-Stacked Configurations
By default when you run USBscope50, it will automatically detect
all the scopes connected via USB and will also check to see if the
scopes are electrically connected together via the stack.
To run in Non-Stacked MIS mode, power USBscope50s via USB
port and run the software. Make sure that software is not running in
demo mode and that number of detected devices corresponds to
number of powered devices. Then plug in the remaining
USBscope50 devices and run the second instance of the Java
application. Software will ignore the scopes that have already been
initialized and are already used and will only attempt to
communicate with the uninitialized USBscope50s.
For example, if you want to run 2 scopes in MIS mode plug in one
USBscope50, and then run USBscope50 Software. Confirm that
channel 1 is detected and running. Insert the second USBscope50 in
the USB port and run another instance of the Java software by
double clicking on the Desktop icon. As software remembers the
position and the window size of last USBscope50 Software
application, two instances of the Java software will overlap. Click
and drag one window and the second application is revealed
underneath. Note the two USBscope50 Software taskbar buttons in
the windows taskbar.
You can simply run multiple copies of the USBscope50 software,
just remember not to power USBscope50 devices all at once.
When running in MIS mode, to easily identify which instance of
software is for which scope you could change the software
Elan Digital Systems Ltd. 14 USBscope50 USER’S GUIDE Iss8