User guide
Table Of Contents
- 1 OVERVIEW
- 2 ABOUT THE USBscope50
- 2.1 General
- 2.2 USBscope50 Architecture
- 2.3 Using More Than One USBscope50
- 2.4 Input Ranges
- 2.5 Probe Compensation
- 2.6 Acquisition Modes
- 2.7 Trigger Modes
- 2.8 Trigger Position
- 2.9 Trigger Threshold
- 2.10 Data manipulation
- 2.11 Import Graph Data
- 2.12 Software Development Kit (SDK) for USBscope50
- 3 SOFTWARE INSTALLATION
- 4 HARDWARE SPECIFICATION
4 HARDWARE SPECIFICATION
All parameters typical @ 20°C unless otherwise stated
4.1 Power Requirements
Supply Voltage: 5.0V ±10% from host USB bus
Total Supply Current: 200mA avg
4.2 Mechanical
Mass: 42g typ.
Case Material Data: Polycarbonate (UL94V rated)
Size (typical in mm): 99.6
18
x 30.6 x 17.5
19
4.3 Environmental
Humidity: <80% non condensing
General Operating Temperature: -10°C to +45°C Ambient
Specific Operating Temperature: 22°C ±3°C for rated accuracy
Full Warm Up Time: 10mins for rated accuracy
Storage Temperature: -40°C to +80°C Ambient
Operating Location: Indoor or under-cover use only
Operational Category: Cat II
Pollution Degree: 2
18
From BNC end to USB end
19
Not including “P” clips on base
Elan Digital Systems Ltd. 31 USBscope50 USER’S GUIDE Iss8