SPIRAL PENDANT MODEL #83047 Français p. 10 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS A F B E H C D G PART A B C D E F G H DESCRIPTION Canopy Cable Threaded Socket Threaded Socket Ring Glass Shade Compression Fitting Bulb Cover 20-Watt G4 Bulb 2 QUANTITY 1 5 5 5 5 5 5 5
HARDWARE CONTENTS AA BB CC DD EE FF Ground Screw Qty: 1 Wire Connector Qty: 3 Short Machine Anchor Screw Qty: 2 Qty: 2 GG Threaded Knob Qty: 2 Mounting Bracket Qty: 1 Safety Cable Loop Anchor Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. The hanging length of the cable (B) for this fixture is adjustable. Hold the fixture canopy (A) up against the ceiling to determine the desired length before the entire fixture is assembled. 1 A F B The cable (B) is held in place by a compression fitting (F). Push up, and hold, the fitting’s spring loaded tube (F) to release the cable (B) for adjustment. 1a 1b B F 2. Temporarily raise mounting bracket (DD) to ceiling. Mark location for anchor (CC).
ASSEMBLY INSTRUCTIONS 4. Screw anchor screws (FF) through mounting bracket (DD) and into anchors (CC). 4 CC DD Hardware Used FF Anchor Screws FF x2 5. Connect safety cable located in canopy (A) to the safety cable loop located on mounting bracket (DD).
ASSEMBLY INSTRUCTIONS 6. Wire connection guide: 6 Ground wire: (bare copper or marked GND) DD • For installation in the United States: Wrap ground wire from outlet box around ground screw (EE) on mounting bracket (DD), no less than 2 in. from wire end. Tighten ground screw (EE). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).
ASSEMBLY INSTRUCTIONS 8. Secure canopy (A) to mounting bracket (DD) with threaded knobs (GG). 8 DD A Hardware Used GG Threaded Knob x2 GG 9. Pass glass shade (E) over threaded socket (C) and secure with threaded socket ring (D).
ASSEMBLY INSTRUCTIONS 10. Insert 20-watt max. G4 base bulb (H) into threaded socket (C). Pass bulb cover (G) over G4 bulb (H). 10 Note: Never touch a halogen light bulb with your bare skin, even when removing the bulb from the package before installing. The oils on your skin will drastically shorten the lifespan of the bulb. C H G CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item.
WARRANTY Distributor warrants products manufactured by it will be free from defects in material and workmanship for one (1) year following the date of shipment. This warranty does not cover bulbs or finish on outdoor product. If any of the warranted products are found by Distributor to be defective, such products will, at Distributor’s option, be replaced or repaired at Distributor’s cost.
LUMINAIRE SUSPENDU EN SPIRALE MODÈLE #83047 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE A F B E H C D G PIÈCE A B C D E F G H DESCRIPTION Pavillon Câble Douille filetée Bague de douille filetée Abat-jour en verre Raccord à compression Cache-ampoule Ampoule G4 20 watts 11 QUANTITÉ 1 5 5 5 5 5 5 5
QUINCAILLERIE INCLUSE AA BB CC DD EE FF Vis de mise à la terre Qté : 1 Capuchon de connexion Vis à métaux Pièce Qté : 3 courtes d’ancrage Qté : 2 Qté : 2 CONSIGNES DE SÉCURITÉ Support de fixation Qté : 1 Boucle du câble de sécurité GG Boutons filetés Qté : 2 Vis à pièce d’ancrage Qté : 2 Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. La longueur du câble de suspension (B) de ce luminaire est réglable. Maintenez le pavillon (A) du luminaire contre le plafond pour déterminer la longueur désirée avant l'assemblage complet du luminaire. 1 A F B Le câble (B) est maintenu en place par un raccord à compression. Poussez vers le haut et maintenez le tube à ressort du raccord (F) pour libérer le câble (B) et permettre le réglage. 1a 1b B F 2. Placez temporairement le support de fixation (DD) au plafond.
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Vissez les vis d'ancrage (FF) à travers le support de fixation (DD) et dans les ancrages (CC). 4 CC DD Quincaillerie utilisée FF Vis à pièce d’ancrage FF x2 5. Connectez le câble de sécurité situé dans le pavillon (A) à la boucle du câble de sécurité située sur le support de fixation (DD).
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Guide de raccordement électrique : 6 DD Fil de terre : (cuivre nu ou marquage GND) EE • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (EE) située sur le support de fixation (DD), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (EE).
INSTRUCTIONS POUR L'ASSEMBLAGE 8. Fixez le pavillon (A) au support de fixation (DD) à l'aide des boutons filetés (GG). 8 DD A Quincaillerie utilisée GG Boutons filetés x2 GG 9. Placez l'abat-jour en verre (E) sur la douille filetée (C) et fixez-le à l'aide de la bague de douille filetée (D).
INSTRUCTIONS POUR L'ASSEMBLAGE 10. Insérez une ampoule G4 de 20 watts max. (H) dans la douille filetée (C). Faites passer le cache-ampoule (G) sur l'ampoule G4 (H). 10 Remarque : Ne touchez jamais une ampoule halogène avec votre peau nue, même lorsque vous retirez l’ampoule de son emballage avant de l’installer. Les huiles que contient votre peau raccourciraient considérablement la durée de vie de l’ampoule. C H G ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire.
GARANTIE Le distributeur garantit les produits qu’il a fabriqués contre tout défaut de matériaux ou de fabrication pour une période de un (1) an à compter de la date d’expédition. Cette garantie ne couvre pas les ampoules ni le fini des produits extérieurs. Si l’un des produits garantis est déclaré défectueux par le distributeur, celui-ci choisira de remplacer ou de réparer le produit à ses frais.