SCONCE MODEL #83069 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS D C A G B E F PART A B C D E F G DESCRIPTION Canopy Thumbscrew Socket Threaded Stand-Off Glass Shade Wire Mesh Canopy Plate 2 QUANTITY 1 3 1 3 1 1 1
HARDWARE CONTENTS BB AA Wire Connector Qty: 3 Short Machine Screw Qty: 2 CC Threaded Knob Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Connect the canopy (A) to the outlet box with short machine screws (BB). 1 Hardware Used BB Short Machine Screw x2 Outlet Box (Not Included) A BB 2. Wire connection guide: 2 Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw (EE) on canopy (A) no less than 2 in. from wire end. Tighten ground screw (EE). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).
ASSEMBLY INSTRUCTIONS 3. Supply wire connection guide: Make wire connections, securing with wire connectors (AA), following the reference chart listed below.
ASSEMBLY INSTRUCTIONS 6. Raise glass shade (E) over socket (C). Pass thumbscrew (B) through glass shade (E) into threaded stand-off (D) to secure. 6 D C B E 7. Raise wire mesh (F) to threaded stand-offs (D). Turn wire mesh (F) slightly then hang off threaded stand-off (D).
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 1.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART B E F AA BB CC B Rev.
APPLIQUE MODÈLE #83069 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE D C A G B E F PIÈCE A B C D E F G DESCRIPTION Pavillon Vis manuelle Douille Entretoise filetée Abat-jour en verre Maille métallique Plaque du pavillon 10 QUANTITÉ 1 3 1 3 1 1 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courtes Qté : 2 CC Boutons filetés Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Branchez le pavillon (A) à la boîte de sortie avec des vis à métaux courtes (BB). 1 Quincaillerie utilisée BB Vis à métaux courtes x2 Boîte de sortie (non incluse) A BB 2.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Guide pour la connexion des fils du cordon d’alimentation : Effectuez le raccordement des fils à l’aide des capuchons de connexion (AA), en respectant le tableau de référence ci-dessous.
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Soulevez l’abat-jour (E) en verre sur la douille (C). Faites passez la vis manuelle (B) à travers l’abat-jour en verre (E) et vissez-la dans l’entretoise filetée (D) pour fixer l’abat-jour. 6 D C B E 7. Soulevez la maille métallique (F) jusqu’aux entretoises filetées (D). Tournez légèrement la maille métallique (F) plus suspendez-la à l’entretoise filetée (D).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE B E F AA BB CC B Rev.