4-LIGHT VANITY MODEL #83071 Français p. 10 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS B C A G D E F PART A B C D E F G DESCRIPTION Canopy Threaded Stand-Off Socket Thumbscrew Glass Shade Wire Mesh Canopy Plate 2 QUANTITY 1 12 4 12 4 4 1
HARDWARE CONTENTS AA BB CC Wire Short Connector Machine Anchor Screw Qty: 3 Qty: 4 Qty: 2 DD Threaded Knob Qty: 4 EE Anchor Screw Qty: 4 3
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room that you are working on.
ASSEMBLY INSTRUCTIONS 2. Connect the canopy (A) to the outlet box with short machine screws (BB). 2 Hardware Used BB Short Machine Screw x2 Outlet Box (Not Included) A BB 3. Screw anchor screws (EE) through canopy (A) and into anchors (CC).
ASSEMBLY INSTRUCTIONS 4. Wire connection guide: 4 Ground wire: (bare copper or marked GND) EE • For installation in the United States: Wrap ground wire from outlet box around ground screw (EE) on canopy (A), no less than 2 in. from wire end. Tighten ground screw (EE). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). AA A • For installation in Can If fixture is supplied with ground wire, wrap ground wire around ground screw (EE) on canopy (A).
ASSEMBLY INSTRUCTIONS 6. Secrue canopy plate (G) to canopy (A) with threaded knobs (DD) 6 Hardware Used A Threaded DD Knobs x4 DD G 7. Insert 60-watt. medium base bulbs into sockets (C). 7 C 8. Raise glass shade (E) over socket (C). Pass thumbscrew (D) through glass shade (E) into threaded stand-off (B) to secure.
ASSEMBLY INSTRUCTIONS 9. Raise wire mesh (F) to threaded stand-offs (B). Turn wire mesh (F) slightly then hang off threaded stand-off (B). 9 B F CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap.
WARRANTY Distributor warrants products manufactured by it will be free from defects in material and workmanship for one (1) year following the date of shipment. This warranty does not cover bulbs or finish on outdoor product. If any of the warranted products are found by Distributor to be defective, such products will, at Distributor’s option, be replaced or repaired at Distributor’s cost.
LUMINAIRE DE MEUBLE-LAVABO À 4 LUMIÈRES MODEL #83071 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
PACKAGE CONTENTS B C A G D E F PIÈCE A B C D E F G DESCRIPTION Pavillon Entretoise filetée Douille Vis manuelle Abat-jour en verre Maille métallique Plaque du pavillon 11 QUANTITÉ 1 12 4 12 4 4 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à métaux Qté : 3 courtes Qté : 2 CC Pièce d’ancrage Qté : 4 DD Boutons filetés Qté : 4 EE Vis à pièce d’ancrage Qté : 4 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • AVERTISSEMENT IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité.
CONSIGNES DE SÉCURITÉ MISE EN GARDE • Prenez soin de lire et de comprendre toutes les instructions avant de commencer l’assemblage et l’installation du luminaire. • Si vous avez des doutes à propos de l’installation, ou si le luminaire ne fonctionne pas correctement, veuillez communiquer avec un électricien qualifié. • Toutes les pièces doivent être utilisées tel qu’il est indiqué dans ces instructions.
INSTRUCTIONS POUR L'ASSEMBLAGE 2. Branchez le pavillon (A) à la boîte de sortie avec des vis à métaux courtes (BB). 2 Quincaillerie utilisée BB Vis à métaux courtes x2 Boîte de sortie (non incluse) A BB 3. Vissez les vis à pièce d’ancrage (EE) à travers le pavillon (A) et dans les pièces d’ancrage (CC).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Guide de raccordement électrique 4 Fil de terre : (cuivre nu ou marquage GND) • Pour une installation aux États-Unis : enroulez le fil de terre provenant de la boîte de sortie autour de la vis de mise à la terre (EE) située sur le pavillon (A), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (EE). Si le luminaire est fourni avec un fil de terre, raccordez-le au fil de terre de la boîte de sortie avec un connecteur de fils (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Fixez la plaque du pavillon (G) sur le pavillon (A) avec les boutons filetés (DD). 6 Quincaillerie utilisée A Boutons DD filetés x4 DD G 7. Insérez des ampoules à culot moyen de 60 W dans les douilles (C). 7 C 8. Soulevez l’abat-jour en verre sur la douille (C). Faites passez la vis manuelle (D) à travers l’abat-jour en verre (E) et vissez-la dans l’entretoise filetée (B) pour fixer l’abat-jour.
INSTRUCTIONS POUR L'ASSEMBLAGE 9. Soulevez la maille métallique (F) jusqu’aux entretoises filetées (B). Tournez légèrement la maille métallique (F) plus suspendez-la à l’entretoise filetée (B). 9 B F ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire.
GARANTIE Le distributeur garantit les produits qu’il a fabriqués contre tout défaut de matériaux ou de fabrication pour une période de un (1) an à compter de la date d’expédition. Cette garantie ne couvre pas les ampoules ni le fini des produits extérieurs. Si l’un des produits garantis est déclaré défectueux par le distributeur, celui-ci choisira de remplacer ou de réparer le produit à ses frais.