SCONCE MODEL #83111 Français p. 09 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS G C D B A E F PART A B C D E F G DESCRIPTION Canopy Socket 40-Watt G9 Bulb Threaded Knobs Diffuser Thumb Screw Bulb Cover 2 QUANTITY 1 1 1 2 1 2 1
HARDWARE CONTENTS BB AA DD CC Ground Screw Qty: 1 Wire Connector Qty: 3 Short Machine Screw Qty: 2 Mounting Bracket Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Connect the mounting bracket (CC) to the outlet box with short machine screws (BB). 1 Hardware Used CC BB Short Machine Screw x2 CC Mounting Bracket x1 Outlet Box (Not Included) 2. Wire connection guide: 2 CC Ground wire: (Bare copper or marked GND) DD • For installation in the United States: Wrap ground wire from outlet box around ground screw (DD) on mounting bracket (CC), no less than 2 in. from wire end. Tighten ground screw (DD).
ASSEMBLY INSTRUCTIONS 3. Supply wire connection guide: Make wire connections, securing with wire connectors (AA), following the reference chart listed below.
ASSEMBLY INSTRUCTIONS 6. Raise diffuser (E) to canopy (A) and secure with Thumb screw (C). 6 A C E 7. Insert 40-watt. G9 bulbs (C) into socket (B). Screw bulb cover (G) onto socket (B). 7 G Note: Never touch a halogen light bulb with your bare skin, even when removing the bulb from the package before installing. The oils on your skin will drastically shorten the lifespan of the bulb.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 1.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART D G AA BB CC DESCRIPTION Threaded Knob Bulb Cover Wire Connector Short Machine Screw Mounting Bracket D Rev.
APPLIQUE MODÈLE #83111 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE G C D B A E F PIÈCE A B C D E F G DESCRIPTION Pavillon Douille Ampoule G9 40 watts Boutons filetés Diffuseur Vis manuelle Cache-ampoule 10 QUANTITÉ 1 1 1 2 1 2 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courtes Qté : 2 CC DD Vis de mise à la terre Qté : 1 Support de fixation Qté : 1 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • AVERTISSEMENT IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Fixez le support de fixation (CC) à la boîte de sortie à l'aide des vis à métaux courtes (BB). 1 Quincaillerie utilisée CC BB Vis à métaux courtes x2 CC Support de fixation x1 2. Guide de raccordement électrique Pour une installation aux États-Unis : Enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (DD) située sur le support de fixation (CC), à au moins 5 cm (2 po) de l’extrémité du fil.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Guide pour la connexion des fils du cordon d’alimentation : Effectuez le raccordement des fils à l’aide des capuchons de connexion (AA), en respectant le tableau de référence ci-dessous.
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Placez le diffuseur (E) sur le pavillon (A) et fixez à l'aide de la vis manuelle (F). 5 A F 6. Insérez une ampoule G9 de 40 watts (C) dans la douille (B). Vissez le cache-ampoule (G) sur la douille (B). E 6 G Remarque : Ne touchez jamais une ampoule halogène avec votre peau nue, même lorsque vous retirez l’ampoule de son emballage avant de l’installer. Les huiles que contient votre peau raccourciraient considérablement la durée de vie de l’ampoule.
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE D G AA BB CC D Rev.