5-LIGHT VANITY MODEL #83113 Français p. 09 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS G C D B A E F PART A B C D E F G DESCRIPTION Canopy Socket 40-Watt G9 Bulb Threaded Knobs Diffuser Thumb Screw Bulb Cover 2 QUANTITY 1 5 5 2 1 2 5
HARDWARE CONTENTS BB AA DD CC EE FF Ground Screw Qty: 1 Wire Connector Qty: 3 Short Machine Screw Qty: 2 Mounting Bracket Qty: 1 Anchor Qty: 4 Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Temporarily raise canopy (A) to wall. Mark location for anchor (EE). Use 9/32 size drill to drill holes for anchor (EE). Insert anchor (EE) into hole. 1 Wall Hardware Used EE Anchor x4 CC EE 2. Connect the mounting bracket (CC) to the outlet box with short machine screws (BB). 2 Hardware Used CC BB Short Machine Screw x2 CC Mounting Bracket x1 Outlet Box (Not Included) 3. Screw anchor screws (FF) through canopy (A) and into anchors (EE).
ASSEMBLY INSTRUCTIONS 4. Wire connection guide: 4 Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw (DD) on mounting bracket (CC) no less than 2 in. from wire end. Tighten ground screw (DD). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw (DD) on mounting bracket (CC).
ASSEMBLY INSTRUCTIONS 5. Pass canopy (A) over mounting bracket (CC) and secure with threaded knobs (D). 5 A CC D 6. Raise diffuser (E) to canopy (A) and secure with Thumb screw (F).
ASSEMBLY INSTRUCTIONS 7. Insert 40-watt. G9 bulbs (C) into socket (B). Screw bulb cover (G) onto socket (B). 7 G Note: Never touch a halogen light bulb with your bare skin, even when removing the bulb from the package before installing. The oils on your skin will drastically shorten the lifespan of the bulb. C B CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture.
WARRANTY Distributor warrants products manufactured by it will be free from defects in material and workmanship for one (1) year following the date of shipment. This warranty does not cover bulbs or finish on outdoor product. If any of the warranted products are found by Distributor to be defective, such products will, at Distributor’s option, be replaced or repaired at Distributor’s cost.
LUMINAIRE DE MEUBLE-LAVABO À 5 LUMIÈRES MODÈLE #83113 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE G C D B A E F PIÈCE A B C D E F G DESCRIPTION Pavillon Douille Ampoule G9 40 watts Boutons filetés Diffuseur Vis manuelle Cache-ampoule 10 QUANTITÉ 1 5 5 2 1 2 5
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courtes Qté : 2 CONSIGNES DE SÉCURITÉ CC DD EE FF Vis de mise à la terre Qté : 1 Support de fixation Qté : 1 Pièce d’ancrage Vis à pièce Qté : 4 d’ancrage Qté : 4 Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • AVERTISSEMENT IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Montez temporairement le pavillon (A) au mur. Marquez l'emplacement de la pièce d’ancrage (EE). Utilisez un foret de perceuse de 9/32 po pour percer les trous pour la pièce d’ancrage (EE). Insérez la pièce d’ancrage (EE) dans le trou. 1 Mur Quincaillerie utilisée EE Pièce d’ancrage CC x4 2. Fixez le support de fixation (CC) à la boîte de sortie à l'aide des vis à métaux courtes (BB).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Guide de raccordement électrique 4 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (DD) située sur le support de fixation (CC), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (DD).
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Faites passer le pavillon (A) sur le support de fixation (CC) et fixez à l'aide des boutons filetés (D). 5 A CC D 6. Placez le diffuseur (E) sur le pavillon (A) et fixez à l'aide de la vis manuelle (F).
INSTRUCTIONS POUR L'ASSEMBLAGE 7. Insérez une ampoule G9 de 40 watts (C) dans la douille (B). Vissez le cache-ampoule (G) sur la douille (B). Remarque : Ne touchez jamais une ampoule halogène avec votre peau nue, même lorsque vous retirez l’ampoule de son emballage avant de l’installer. Les huiles que contient votre peau raccourciraient considérablement la durée de vie de l’ampoule. 7 G C B ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire.
GARANTIE Le distributeur garantit les produits qu’il a fabriqués contre tout défaut de matériaux ou de fabrication pour une période de un (1) an à compter de la date d’expédition. Cette garantie ne couvre pas les ampoules ni le fini des produits extérieurs. Si l’un des produits garantis est déclaré défectueux par le distributeur, celui-ci choisira de remplacer ou de réparer le produit à ses frais.