Installation Guide

HARDWARE CONTENTS
AA
CCBB
Wire
Connector
Qty: 3
Threaded
Knob
Qty: 2
Allen Tool
Qty: 1
Anchor
Screw
Qty: 2
Short
Machine
Screw
Qty: 2
Anchor
Qty: 2
DD
Mounting
Bracket
EE
FF GG HH
Qty: 1
3
Ground
Screw
Qty: 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• IMPORTANT: NEVER attempt any work without shutting off the electricity.
• Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the
“OFF” position and unscrew the fuses(s), or switch “OFF” the circuit breaker switch(es), that
control the power to the fixture or room that you are working on.
• Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull
chain, place those in the "OFF" position.
• Do not touch hot LED.
• The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent
looking directly at the LEDs with unaided eyes for more than a few seconds.
• WARNING: California Prop 65: This lighting fixture contains chemicals known to the state of
California to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.