Installation Guide

ASSEMBLY INSTRUCTIONS
7
6. Pass canopy (A) over the mounting bracket
(DD) and secure with the threaded knobs (FF).
Hardware Used
x 2
Threaded
Knob
FF
7. Raise small LED ring (B) to canopy arm (C).
Connect wire from the LED ring (B) to wire from
the canopy arm (C). Repeat this step for the
large LED ring (E).
Hardware Used
x 1
Allen
Tool
GG
8. Screw in the mounting screw (D) using the allen
tool (GG) to secure the small LED ring (B) and
large LED ring (E) to the canopy arm (C).
A
DD
6
FF
C
B
7
B
D
GG
C
8