3-LIGHT VANITY MODEL #83136 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS F C A E B D PART A B C D E F DESCRIPTION Canopy Crystal Support Socket Threaded Cap Crystal 20-Watt G4 Bulb 2 QUANTITY 1 3 3 3 3 3
HARDWARE CONTENTS AA BB CC DD EE FF GG Ground Screw Qty: 1 Wire Canopy Connector Short Screw Machine Qty: 3 Qty: 4 Screw Qty: 2 Mounting Bracket Qty: 1 Anchor Qty: 2 Anchor Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Temporarily raise canopy (A) to wall. Mark location for anchor (FF). Use 9/32 size drill to drill holes for anchor (FF). Insert anchor (FF) into hole. 1 Wall A Hardware Used FF Anchor x2 FF 2. Connect the mounting bracket (DD) to the outlet box with short machine screws (BB). Hardware Used BB Short Machine Screw x2 DD Mounting Bracket x1 2 DD Outlet Box (Not Included) BB 3. Screw anchor screws (GG) through canopy (A) and into anchors (FF).
ASSEMBLY INSTRUCTIONS 4. Wire connection guide: 4 Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw (EE) on mounting bracket (DD) no less than 2 in. from wire end. Tighten ground screw (EE). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw (EE) on mounting bracket (DD).
ASSEMBLY INSTRUCTIONS 5. Pass the canopy (A) over the mounting bracket (DD) and secure with the canopy screws (CC). 5 Hardware Used CC Canopy Screw x4 DD A CC 6. Insert 20-watt max. G4 base bulb (F) into socket (C). Screw crystal support (B) onto socket (C). Pass crystal (E) over crystal support (B) and secure with threaded cap (D). 6 C F Note: Never touch a halogen light bulb with your bare skin, even when removing the bulb from the package before installing.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 1.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART B D E AA BB CC DD FF GG DESCRIPTION Crystal Support Threaded Cap Crystal Wire Connector Short Machine Screw Canopy Screw Mounting Bracket Anchor Anchor Screw B PART # CS83136 TC83136 C83136 WC001 SCR832X050 CANS83136 XBAR83136 AB001 AS001 D E CC DD BB AA FF GG Printed in China Rev.
LUMINAIRE À 3 LUMIÈRES POUR MEUBLE-LAVABO MODÈLE #83136 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE F C A E B D PIÈCE A B C D E F DESCRIPTION Pavillon Support du cristal Douille Capuchon fileté Cristal Ampoule G4 de 20 watts 10 QUANTITÉ 1 3 3 3 3 3
QUINCAILLERIE INCLUSE AA BB CC Capuchon de connexion Vis à Vis du métaux pavillon Qté : 3 courtes Qté : 4 Qté : 2 DD EE GG FF Vis de mise à la terre Qté : 1 Support de fixation Qté : 1 CONSIGNES DE SÉCURITÉ Pièce d’ancrage Vis à pièce Qté : 2 d’ancrage Qté : 2 Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • AVERTISSEMENT IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Placez temporairement le pavillon (A) contre le mur. Marquez l'emplacement des ancrages (FF). Utilisez une perceuse équipée d'un foret de 9/32 po afin de percer les trous pour les ancrages (FF). Insérez les ancrages (FF) dans les trous. 1 Mur A Quincaillerie utilisée FF Pièce d’ancrage x2 2. Fixez le support de fixation (CC) à la boîte de sortie à l'aide des vis à métaux courtes (BB).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Guide de raccordement électrique 4 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (EE) située sur le support de fixation (DD), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (EE).
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Placez le pavillon (A) sur le support de fixation (DD) et fixez à l'aide des vis du pavillon (CC). 5 Quincaillerie utilisée CC Vis du pavillon x4 DD A CC 6. Insérez une ampoule G4 de 20 watts max. (F) dans la douille (C). Vissez le support du cristal (B) dans la douille (C). Placez le cristal (E) sur le support du cristal (B) et fixez à l'aide du capuchon fileté (D).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE B D E AA BB CC DD FF GG B Rev.