Installation Guide

4
Hardware Used
1. Temporarily raise mounting bracket (B) to wall.
Mark location for anchor (EE). Use 9/32 size drill
to drill holes for anchor (EE). Insert anchor (EE)
into hole.
x 2
Anchor
EE
Hardware Used
3. Screw anchor screws (FF) through mounting
bracket (B) and into anchors (EE).
x 2
FF
Anchor
Screws
3
FF
EE
B
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
ASSEMBLY INSTRUCTIONS
2. Connect the mounting bracket (B) to the outlet
box (not included) with short machine screws
(BB).
Short Machine
Screw
x 2BB
Hardware Used
2
B
BB
Outlet Box
1
Wall
EE
B