Installation manual

E L A N H O M E S Y S T E M S

A12 INSTALLATION MANUAL

Multi-Room Applications

The A12 is specifically designed for multi-room applications. Virtually every feature was selected to enhance the

multi-room experience and simplify the multi-room installation. With Buffered Loop Outputs, Bus Modes, and

advanced Trigger options, the A12 can be customized for even the most complex systems.

Independent Stereo Zones

The A12 is designed to easily power six independent stereo zones without any special setup procedures. This is the

standard configuration for most multi-zone audio distribution systems. In the drawing below, each pair of speakers

will have independent line-level volume control.

Three Independent Stereo Zones

• Zone 1 Output to Line Inputs 1 & 2

• Zone 2 Output to Line Inputs 3 & 4

• Zone 3 Output to Line Inputs 5 & 6

• Bus Mode DIP Switches in Default DIRECT Position

Each Zone’s Speakers Volume Ramps Up & Down Independently

Wide Coverage Zone

Set A6

BUS MODE

Button

To ON

Bus Mode Button

Line Level

Analog Audio

Output

Figure 2-2: Independent Stereo Zones