Specifications

70 Élan™SC310 Microcontroller Data Sheet
PRELIMINARY
ABSOLUTE MAXIMUM RATINGS
Storage Temperature....................... –65°C to +150°C
Ambient Temperature Under Bias ... –65°C to +125°C
Supply Voltage V
CC
with
Respect to V
SS
................................–0.5 V to +7 V
Voltage on Other Pins...............–0.5 V to (V
CC
+0.5 V)
Stresses above those listed may cause permanent device failure. Functionality at or above these limits is not implied. Exposure
to Absolute Maximum Ratings for extended periods may affect device reliability.
OPERATING RANGES
Operating ranges define those limits between which the functionality of the device is guaranteed.
Table 37. DC Characteristics over Commercial and Industrial Operating Ranges
(Plastic Shrink Quad Flat Pack (QFP), 33 MHz, 3.3 V)
VCCIO = 3.0 V – 3.6 V; T
AMBIENT
= 0°C to +70°C (commercial); T
CASE
= -40° to +85°C (industrial)
Notes:
1. Current out of a pin is given as a negative value.
2. VCC, VCC1, AVCC = 3.3 V and VCC5, VCCSYS, VCCSYS2 = 5.0 V.
3. Fc = 1 MHz.
Symbol Parameter Description
Preliminary
Unit
Min Typ Max
f
osc
Frequency of Operation (internal CPU clock) 0 33 MHz
P
CC
(2)
Supply Power—CPU clock = 33 MHz (VCCMEM=3.3 V) 582 778 mW
P
CCSS
(2)
Suspend Power—CPU idle, all internal clocks stopped except
32.768 kHz
0.12 mW
V
OH(CMOS)
Output High Voltage I
OH(CMOS)
= –0.5 mA VCC– 0.45 V
V
OL(CMOS)
Output Low Voltage I
OL(CMOS)
= 0.5 mA 0.45 V
V
IH(CMOS)
Input High Voltage 2.0 VCC+0.3 V
V
IL(CMOS)
Input Low Voltage –0.3 +0.8 V
I
LI
Input Leakage Current (0.1 V≤V
OUT
≤VCC)
(all pins except those with internal pull-up/pull-down resistors)
±10 µA
I
IH
Input Leakage Current V
IH
= VCC – 0.1 V
(all pins with internal pull-down resistors)
60 µA
I
IL
Input Leakage Current V
IL
= 0.1 V
(pins with internal pull-up resistors)
–60 µA
I
LO
Output Leakage Current (0.1 V≤V
OUT
≤VCC) ±15 µA
C
in
(3)
I/O Capacitance 15 pF
AVCC
RP–P
Analog V
CC
ripple peak to peak 100 mV