Installation manual
E L A N H O M E S Y S T E M S
Page 16 © ELAN Home Systems 2009 • All rights reserved.
A2 INSTALLATION MANUAL
Line Ouputs
A stereo or monaural audio signal connected to the A2’s main LINE INPUT is routed to the A2’s RCA Line Outputs.
This feature is excellent for standalone distributed audio systems where one source (i.e. an A/V Receiver) is providing
audio to the entire home, and also for ELAN multi-room applications where a zone’s audio signal needs to be routed
to multiple amplier channels. Examples of both these applications are shown in the Chapter 2.
Line audio outputs enable connection of additional amplifiers to allow further system expansion. Use high quality
RCA interconnect cables to ensure low noise and great sound. The A2 Line Outputs are buffered, a maximum of four
amplifiers may be 'daisy-chained' to each Line Outputs.
A2 #1
From Audio
Output Source
RCA Patch
Cable
A2 #2
RCA Patch
Cable
To A2s
#3-4
Figure 3-2: Line Outputs