Installation manual

ELAN HOME SYSTEMS D16 INSTALLATION MANUAL
© ELAN Home Systems 2010 | All rights reserved.
Page 14
Normal Mode
Volume Menu
To adjust amplifier output gain on an individual channel, press the MENU button to cycle
through the setting options until the following screen appears:
Use the CHANNEL button to select the desired channel and the UP and DOWN arrow
buttons to increment and decrement the gain setting. Selecting ALL with the CHANNEL
button applies settings to all 16 channels.
Current trigger status for the selected channel is shown as well as an indication if power
saving mode is engaged (PS).
The VOLUME Menu will allow any or all channel's volume to be adjusted from 0% (MUTE)
to 100% (maximum gain).
The Factory Default setting for each channel is 75.
The VU (Volume Unit) bar displays real time (current) volume (in dBu) detected at the
selected channel output. The range is from -15 dBu to+30 dBu. The arrowhead indicates a
recent output peak level.
TRIGGER and PS (Power Sense) status are also displayed.
(See Power Saving Menu on page 26, and Trigger information on pages 39-41.)
(Continued on next page)
D16 VOLUME MENU
CH:1 Volume:45.%
-15 +30
dBu
Trigger ON
Figure 2-6
Volume Menu