Installation manual

ELAN HOME SYSTEMS D16 INSTALLATION MANUAL
© ELAN Home Systems 2010 | All rights reserved.
Page 15
Volume Menu (Continued)
Trigger ON is the factory default.
The TRIGGER options are:
• On: The selected channel is on (consuming energy) and the trigger jack on the rear panel
is active.
• Off: The selected channel is off (NOT consuming energy) and the trigger jack on the rear
panel is not active.
• On/PS: The selected channel is off (NOT consuming energy) because the selected channel
is in Power Saving Mode even though the trigger jack on the rear panel is active.
When ACE (Automatic Clip Elimination) is active on the selected channel, ACE will be
displayed above Volume %.
(See "ACE Menu" on page 20.)
When AVR (Automatic Volume Reduction) is active, AVR is displayed above Volume %.
AVR is active whenever the amp is being overdriven. When AVR is active, the D16 turns its
volume down until it is not being overdriven. The D16 will return to its normal volume
setting when it is no longer being overdriven.
(See the Troubleshooting section for more information on AVR.)
D16 VOLUME MENU
CH:1 Volume: %
-15 +30
dBu
Trigger ON
D16 VOLUME MENU
CH:1 Volume: %
-15 +30
dBu
Trigger ON
Figure 2-7
Volume Menu with Ace
Figure 2-8
Volume Menu with AVR