Installation manual

ELAN HOME SYSTEMS D16 INSTALLATION MANUAL
© ELAN Home Systems 2010 | All rights reserved.
Page 17
Input Select Menu
To change the input used for each output, press the MENU button to cycle through the
setting options until the following screen appears:
Select the channel whose input you wish to change by pressing the CHANNEL button until
the correct channel is displayed. Once the desired output channel is selected pressing the
UP and DOWN arrows will cycle through the following input options:
• Input 1 Direct: This is the default, Channel's audio is taken from audio input 1
• Input 1 + 2 Mono Direct: Channel's audio is the sum of audio inputs 1 and 2
(Mono)
• Input 1 Bus A: Channel's audio is taken from audio input 1 which is Bus A
*
• Input 1 + 2 Mono Bus A: Channel's audio is the sum of audio inputs 1 and 2
(Mono) which is Bus A
*
• Input 9 Bus B: Channel's audio is taken from audio input 9 which is Bus B
*
• Input 9 + 10 Mono Bus B: Channel's audio is the sum of audio inputs 9 and 10
(Mono) which is Bus B
*
• Input 3 Bus C: Channel's audio is taken from audio input 3 which is Bus C
• Input 3 + 4 Mono Bus C: Channel's audio is the sum of audio inputs 3 and 4
(Mono) which is Bus C
• Input 11 Bus D: Channel's audio is taken from audio input 11 which is Bus D
• Input 11 + 12 Mono Bus D: Channel's audio is the sum of audio inputs 11 and 12
(Mono) which is Bus D
•
(Continued on next page)
D16 INPUT SELECT MENU
Channel:1
Input: 1 .
Bus A
Figure 2-9
Input Select Menu