Installation manual

ELAN HOME SYSTEMS D16 INSTALLATION MANUAL

Page 20

ACE Menu

To enable or disable ACE (Automatic Clipping Eliminator) for the channels press the MENU

button to cycle through the setting options until the following screen appears:

When ACE is set to ON, (Factory Default) the amplified output is continuously monitored

for signal clipping. Extremely fast transients are ignored but if it sees a consistent clipping

trend, it turns the respective channel down by one increment. This action is repeated until

no more clipping is detected for five seconds. After 5 seconds it gradually increases the

gain of the channel back to its last setting.

ACE will be displayed on the Volume screen. (See Volume Menu on page 14.)

Individual channels 1 - 16 options are ON or OFF.

When the All channel option is selected the possible status options are MIXED, ON or OFF.

MIXED means that some channels are ON and some channels are OFF. Press the

CHANNEL button to change the channel. Press UP and DOWN buttons to enable or disable

ACE for the selected channel.

D16 ACE MENU

Channel:1

Automatic

Clip

Eliminator: ON

Figure 2-12

ACE Menu