Installation manual

ELAN HOME SYSTEMS D16 INSTALLATION MANUAL

Page 22

Output View Menu

For information relating to the amplified outputs for the D16 press the MENU button to

cycle through the setting options until the following screen appears:

This menu selection displays four bar graphs which correspond to the output channel

levels for each of the 16 channels. Press the UP and DOWN arrow buttons to see

information for the next group of four channels. Press the CHANNEL button to move

forward one channel at a time.

A clipping indicator is located in the bottom left of the screen. The indicator will show if any

of the four currently displayed channels are clipping.

Utility Sub-Menu

The D16 features a Utility sub-menu that is designed to provide easy access to the

amplifier’s operational functions.

Once the Utility sub-menu has been accessed by cycling through the MAIN Menu

functions until you see “UTILITY” at the top of the display, use the CHANNEL button to

cycle to the next sub-menu option. Pressing the MENU button will return the D16 to the

MAIN Menu options.

NOTE:

Whenever the LCD times out, the Utility menu will reset to display the Operating Mode

screen first. However, if you navigate to ANY OTHER screen in the Utility menu by

pressing the Channel button and then navigate through the Main menu by pressing the

Menu button without an LCD timeout, the first Utility screen displayed will be the

previously selected Utility menu screen.

The Utility sub-menu options will be discussed in detail on the following pages.

Figure 2-14

Output View Menu

D16 OUTPUT VIEW MENU

Outputs: 1 -> 4 dBu

-15 +30

Clip:None