Installation manual

ELAN HOME SYSTEMS D16 INSTALLATION MANUAL
© ELAN Home Systems 2010 | All rights reserved.
Page 61
Appendix A: IR / VIA!NET Command Set
The D16 IR code set includes 16 ALL Channel commands as well as six Scene commands.
Additionally, each of the 256 possible individual channels has its own group of 16
commands.
ALL Channel Commands
Stereo In 1_1 Switches each output to its direct input.
Mono In 2_1 Switches each output to its “summed-mono” input. Outputs 1 & 2 are the “summed”
signal of inputs 1 & 2, outputs 3 & 4 are the “summed” signal of inputs 3 & 4, etc.
Stereo Bus A In
Switches all ODD outputs to the BUS A “left” input and all EVEN outputs to the BUS A
“right” input.
Mono Bus A In
Switches each output to the “summed” left and right inputs of Bus A.
Stereo Bus B In
Switches all ODD outputs to the BUS B “left” input and all EVEN outputs to the BUS B
“right” input.
Mono Bus B In Switches each output to the “summed” left and right inputs of Bus B.
Volume Down Decrements the volume of all outputs.
Volume Up Increments the volume of all outputs.
Unmute Unmutes all outputs.
Mute Mutes all outputs.
Mute Toggle Toggles all outputs between “mute” and “unmated.”
Power Off Switches all outputs off.
Power On Switches all outputs on and checks level for min/max turn on values.
Power Toggle Toggles all outputs between “on” and “off.”
Link
Links stereo pairs (i.e.: 1 & 2, 3 & 4, 5 & 6, etc.) Allows channel pairs to be controlled
together.
Example: Channels 1 & 2 are being used for a stereo zone; the Link command will force
all IR commands for either channel 1 or channel 2 to affect both channels. This holds
true for all stereo pairs, (3/4, 5/6, 7/8, etc.)
Unlink
Unlinks stereo pairs (i.e.: 1 & 2, 3 & 4, 5 & 6, etc.) Allows channel pairs to be
controlled individually.