Specifications

Connecting To Your A/V System

To connect to your A/V System with or without a VIA! Touch Panel:

1. Plug the included AC power adapter into the back of the VIA!migo

base, and the other end into any available AC power outlet.

2. Plug the A/V Cable into the back of the VIA!migo base. Be sure to

match the color on the A/V plugs (Red, White and Yellow) with the

corresponding jack color or input type.

3. Plug the other end of the A/V Cable into the corresponding jacks of

any available input on the A/V system. (White plug - Left Audio, Red

plug - Right Audio and Yellow plug - Video).

When connecting the VIA!migo to an ELAN Multi-Room System, it is treated

exactly like any other Audio/Video source for purposes of audio and video

connections.

NOTE: The S-Video Out connection can be used for even better

video performance (S-Video cable not included).

4. If using a VIA! Touch Panel, use it to select and turn on your

VIA!migo. Also turn on your home stereo and select the correct input

for the VIA!migo.