Specifications

touch
7
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
USER INTERFACES
HIGH-POWER ROTARY VOLUME CONTROLS (100WPC RMS)
STANDARD VOLUME CONTROLS (35WPC RMS)
STEREO
For high-power stereo listening areas, ELAN offers
three rotary volume controls that meet the needs
of just about any application.
MONO
There are numerous applications for monaural
speakers in distributed audio systems. In fact, any
room without a stationary listening area is a prime
candidate for speakers with a combined Left and
Right signal. ELAN offers two high-power mono
volume controls for these common applications.
All models available in bulk packs of 20. Bulk pack trim kits sold separately.
Specifications Common
to All Models:
Frequency Response: ..20-20kHz, +/- 1dB
THD: ................................................ <1%
Dynamic Range: ........43dB over 12 steps
DC Resistance: ..........5.0 Ohms minimum
Wire Requirements:........Min. 18 AWG twisted
pair for audio plus Cat-5 for models w/override
MONO VOLUME CONTROLSSTEREO VOLUME CONTROLS
ELECTRONIC VCs ROTARY VOLUME CONTROLS
VS100
Rotary
Stereo
100WPC
1x, 2x, 4x
No
N/A
-56dB @ 4x,
last step
D1650
Z660, Z300
VSO100
Rotary
Stereo
100WPC
1x, 2x, 4x
Yes
+12VDC
@ 45mA
-56dB @ 4x,
last step
D1650
Z660, Z300
VSO
Rotary
Stereo
35WPC
1x, 2x, 4x, 8x
Yes
+12VDC
@ 45mA
-56dB @ 8x,
last step
Z660, Z300,
MAC24
VS
Rotary
Stereo
35WPC
1x, 2x, 4x, 8x
No
N/A
-56dB @ 8x,
last step
Z660, Z300,
MAC24
VSE100
Electronic
Stereo
100WPC
1x, 2x, 4x
Yes
+12VDC
@ 45mA
-56dB @ 4x,
last step
D1650
Z660, Z300
VEHP
Electronic
Stereo
100WPC
1.3x Fixed
Yes
+12VDC
@ 45mA
-56dB @
last step
D1200, D1650
Z660, Z300
VHP
Rotary
Stereo
100WPC
1.3x Fixed
No
N/A
-56dB @
last step
D1200, D1650
Z660, Z300
VMO
Rotary
Mono
35W
2x, 4x, 8x, 16x
Yes
+12VDC
@ 45mA
-56dB @ 16x,
last step
Z660, Z300,
MAC24
VM100
Rotary
Mono
100W
2x, 4x, 8x
No
N/A
-56dB @ 8x,
last step
D1650
Z660, Z300
VMO100
Rotary
Mono
100W
2x, 4x, 8x
Yes
+12VDC
@ 45mA
-56dB @ 8x,
last step
D1650
Z660, Z300
VSO100
High-Power Stereo Volume Control with Override
and 1, 2 and 4x impedance match settings
VS100
High-Power Stereo Volume Control with 1, 2 and 4x
impedance match settings
VHP
High-Power Stereo Volume Control with Override and
a fixed 1.3x impedance setting. Designed specifically
for the ELAN D1200 Digital Power Amplifier.
VSO
Standard Stereo Volume Control with Override and 1, 2, 4 and 8x impedance match settings.
For use with the MAC24 Music & Communications Center or any other low-power application
that requires a stereo volume control with a high (8x) impedance match setting.
VS
Standard Stereo Volume Control with 1, 2, 4 and 8x impedance match settings.
For use with the MAC24 Music & Communications Center or any other low-power application
that requires a stereo volume control with a high (8x) impedance match setting.
VMO
Standard Mono Volume Control with Override and 2, 4, 8 and 16x impedance match settings.
For use with the MAC24 Music & Communications Center or any other low-power application
that requires a mono volume control with a high (16x) impedance match setting.
VMO100
High-Power Mono Volume Control with Override
and 2, 4 and 8x impedance match settings
VM100
High-Power Mono Volume Control with 2, 4 and 8x
impedance match settings
Type
Stereo/Mono
Power Handling (RMS)
Impedence Match Settings
Override
Override Control
Max. Attenuation
Compatible ELAN
Amplifiers
UI_final.qxd 1/25/05 10:33 AM Page 7