Specifications

power
26
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
AMPLIFIERS
ZFAN2 SYSTEM COOLING MODULE
FEATURES & SPECS
Temperature-sensing dual 12VDC
brushless fan design
Front panel power and “Fan On” LEDs
Two-minute turn-off delay
SPECIFICATIONS:
Flow Rate: ..Variable, up to 150 cu. ft. per
minute
Remote Trigger: ..5-24V AC/DC +12VDC @
0.1A trigger loop output
Power Requirements: ..........120VAC, 12W
Dimensions:
Z•FAN2: ........17" W x 2-1/4" H x 10" D
432mm W x 58mm H x 254mm D
Z•FAN2R: ......19" W x 1-3/4" H x 10" D
483mm W x 45mm H x 254mm D
ETL
®
listed
The Z•FAN2 was developed to address the
growing need for cabinet and rack system
cooling, and it does so in a quiet, low-
profile, unobtrusive fashion.
This single-rack fan design will draw up to
150 cubic feet of air per minute. Dual
12VDC brushless motors maintain whisper
quiet operation without noise feeding
back into the 120V circuits.
Temperature-sensitive speed control
provides just the right amount of
cooling at just the right times, thus
minimizing background fan noise! The
remote trigger input turns the fan on
and off when needed. The trigger loop
output can be daisy chained to additional
triggerable devices or Z•FANs, and the
two-minute turn off delay circuit prevents
heat build up in the rack once the
equipment has been turned off.
(Also Available in 19” Rack Mount Version, Model ZFAN2R)
Am_FINAL.qxd 1/24/05 3:51 PM Page 26