Specifications

power
ZPOWER POWER CONTROLLER
The Z•POWER Controller is a critical hub
for both home theater and distributed
A/V systems, addressing such needs as
surge protection, sequenced AC switching
and multiple triggering options.
The Z•POWER Controller has eight earth-
grounded outlets. Two current sensing
outlets are always on. Four outlets turn
on immediately with a trigger input. Two
more turn on with a programmable delay.
No other power manager has as many
trigger options. The six switched outlets
can be triggered by the AC current sense
of the two “Always On” outlets, by a
remote trigger input,from the ELAN
™
SENSE
sensor input, or by the front panel switch.
Any combination of triggers can be select-
ed so that multiple sources can initiate
the turn-on sequence.
The 12VDC triggered output and a relay
contact closure make it easy to close
drapes or lower screens. And the relay
output is programmable, allowing home
theater triggered events to close drapes,
but system-triggered events to turn on
sources without closing the drapes!
High-quality transient voltage protection
is also included, with inductive AC line
filtering, MOV Surge Protection, 15A
Circuit Breaker, a 2-line telephone surge
suppressor and 1GHz coax surge
suppressor loop-through.
Front Panel LEDs indicate status and fault
monitoring of the AC line.
The Z•POWER Controller provides an
extended warranty against surge on
specified ELAN equipment purchased with
and connected directly to it.
27
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
AMPLIFIERS
FEATURES & SPECS
AC OUTLETS:
Two “Always On” with current sense
Four “Switched” when triggered
Two “Delayed” with four time settings
Switching Capacity: 1500W total
TRIGGER OPTIONS:
3–24V AC/DC
120VAC Current Sense
ELAN
™
SENSE Input
Combination Sense
CONTROL OUPTUTS:
+12VDC @ 100mA remote trigger
output jack
Configurable dry relay contact
AC POWER CONDITIONING
AND PROTECTION:
800 Joule, MOV surge protection
270V clamping level
15dB line noise rejection
15A circuit breaker
LOW VOLTAGE SIGNAL SURGE
PROTECTION:
1GHz coax surge suppressor
Two telephone line surge suppressors
with resetable fuses
FRONT PANEL FEATURES:
Master On/Off switch
Trigger option and delay dip switches
LEDs: Power, Triggered, Delay,
Ground OK, Phase OK
SPECIFICATIONS:
Power Requirements: . . . . . . . . . . . .120VAC, 12W
Dimensions:..................................................
Z•POWER:..........17" W x 2-1/4" H x 10" D
432mm W x 58mm H x 254mm D
Z•POWERR:........19" W x 1-3/4" H x 10" D
483mm W x 45mm H x 254mm D
ETL
®
Listed
(Also Available in 19” Rack Mount Version, Model ZPOWERR)
In addition to our standard two-year warranty against manufacturer’s defects, ELAN
Home Systems will warranty the ELAN products listed below against surge-related
damage for a period of five years. The conditions of this extended warranty are
detailed in the Z•POWER CONTOLLER Operation Manual, and must be met in full for
this warranty to apply. The Z•POWER CONTROLLER Extended Warranty Program covers
the following ELAN products:
S6 Z•300/301 Z•660/661 HDC2000/2001 HDC2042
S12/S12R Z•600/601 Z•880/881 HDC2010 HDC2050
Z•630/631 Z•FAN2/2R HDC1020 HDC2060
HDC2200
Z•POWER CONTROLLER EXTENDED WARRANTY PROGRAM
Am_FINAL.qxd 1/24/05 3:51 PM Page 27