Specifications

connect
60
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
STRUCTURED WIRING
FEATURES & SPECS
Cover for E32 enclosure
Textured finish
Heat ventilation grills
Wire identification label
94V-0/5 VA rated
ETL
®
Listed
Molded from impact-resistant ABS resins,
this neutral colored cover for the E32
provides a high-quality, finished look to
your structured wiring center.
Made from flame-retardant 94V-0/5VA
ABS plastic, the C32 has a textured finish
with top and bottom ventilation grills.
Four plastic lock-down screws and wire
identification label included.
C32 32" ENCLOSURE COVER (FORMERLY ELAN C2000)
FEATURES & SPECS
18" high enclosure
Movable side mounting tabs
Eight 2" and four 3/4" knockouts
Two columns of 34 grid spaces
per column (total 68 grid spaces)
Single-gang box knockout
Accepts AC4 outlet box accessory and
ECS cable spacer (see page 62)
16-gauge galvanized steel, painted
white
Dimensions:
14-1/4" W x 18" H x 3-13/16" D
362mm W x 458mm H x 97mm D
UL
®
listed
C18 Enclosure Cover sold separately
Constructed from 16 gauge galvanized
steel, the E18 enclosure has a built-in grid
for the mounting of ELAN SW modules.
This UL
®
-listed enclosure fits in a standard
16" (on-center) stud bay and has eight 2"
and four 3/4" knockouts for cable routing.
Two vertical rows of 34 grid spaces
accommodate multiple SW Data, Telephone
and Video modules as well as the MAC24
Music Communications Center. The E32
also features a single-gang box knockout
and adjustable side mounting tabs.
E18 18" ENCLOSURE
SWS_FINAL.qxd 1/25/05 10:15 AM Page 60