Specifications

touch
5
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
USER INTERFACES
Bedside or desktop control has never
looked better than with a Z•100/Z•150
installed in the Z•PAD Valet! Z•PAD Valets
are handcrafted from select Kentucky
hardwoods and then finished in a choice
of rich colors.
These valets will also accommodate stereo
volume controls and ELAN IR tubes!
Elegant to the touch, these valets include
soft rubber feet to prevent marring or
scratching of furniture finishes.
Available in: Black, Cherry, Unfinished,
and White.
Note: The Z•VALET does not accommodate
the Z•250 or Z•200 keypads.
ZVALET Z•100/Z•150 DESKTOP VALET
FEATURES & SPECS
DIMENSIONS:
5-1/2" W x 3-1/2" H x 4-3/4" D
140mm W x 89mm H x 121mm D
INCLUDES:
14-ft. RJ-45-to-RJ-45 interconnect cable
Double and single-cutout tops for
mounting a Z•100/150 combo,
or just a Z•100
This is a must-have accessory for audio
sub-zone muting and local in-room source
control. The Z•025 mounts directly to the
back of the Z•100 or Z•250 keypad.
SPEAKER RELAY MODE
A Z•025 on each Z•100/250 keypad allows
you to mute or unmute the speakers in
one room of a zone independently of
other speakers in that zone.
AUDIO DETECT MODE
The Z•025 automatically switches a local audio
source to the in-wall speakers when detected,
and then switches back to the main system
audio when the local source is turned off or
when an ELAN Page/Door Chime is detected.
Note: Z•025 Audio Detect mode is not
available when used with the System12.
Z025 SPEAKER RELAY/AUDIO DETECT
SWITCHING MODULE
FEATURES & SPECS
Speaker level detect threshold: ..............
5mV min. to 500mV max.
Switch back delay time: ........Adjustable
from 10 to 60 seconds
Priority Switcher Relay:....................4PDT
Speaker Disconnect Relay: ......DPDT 10A
contacts
Deplugable, labeled connector
Installs on the back of a Z•100 or Z•250
Power Requirements: ..85mA @ +12VDC
(total keypad current draw 150mA)
Wiring Requirements: ................18 AWG
twisted pairs for speaker level
connections. For page and door chime
connections, use a spare pair from the
Z•100 Cat-5
Use ELAN PWR12 Power Supplies for
systems with Z•025s, multiple volume
controls with override, or to add
additional Z•PADs to the Z•630.
PWR12 POWER SUPPLY
FEATURES & SPECS
Output Voltage: 12VDC @ 2.0A
UL
®
Listed
UI_final.qxd 1/25/05 10:33 AM Page 5