Specifications

Accessories
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
93
LSWP S128P LOCAL SOURCE WALL PLATE KIT
SPECIFICATIONS
Input Level......................0 – 2V RMS
Gain...................+1dB at Source plate,
-1dB at S12, 0dB total
Freq. Resp.. ..........20Hz to 20kHz, +/-0.5dB
THD + Noise.......................<0.01%
IR Output Level.......................+12V
IR Bandwidth.......................100kHz
Wire Requirements............(Audio / IR) Cat-5,
(Video) RG-6 Coax
Style.................White Decora
®
-style only
Designed for use with the
S128P’s eight Local Source
Inputs, the LSWP sends
audio from any local source
(e.g. a CD player in the
Master Bedroom) back
down to the S128P, and IR
control signals from the
S128P back to the local
source.
Audio and IR are transmitted over a single run of
Cat-5. Balanced differential line drivers ensure
noise-free audio from sources located up to 300 ft.
from the S128P.An IR OUT jack allows you to
connect an IR emitter (included) for control of the
source from that zone.
Kit includes:
• (1) Local Source Wall Plate
• (1) IR Emitter
• (2) 1-Meter Stereo Interconnect Cables
• (1) Leviton
®
Frame
ORDER NO. LSWP
CVRP COMPONENT VIDEO RECEIVE PLATE
SPECIFICATIONS
Send Plate
Input Imp.....75 Ohms, 1V pk-pk (3.4V max)
Output Imp..................50 Ohms
Bandwidth ...............450MHz (-3dB)
Channel Separation . . . . . . . . . . . . . 90dB
Power ...............16VDC, 1.5A (incl.)
Receive Plate
Input Imp.............50 Ohms,(4.0V max)
Output Imp. . . . 75 Ohms, 1V pk-pk (3.5V max)
Bandwidth: 150MHz .....(125MHz@500 ft.)
THD ..........................-50dBc
Network Gain ....................1.0
Power...............Supplied by Send Plate
Style.................White Decora
®
-style only
ORDER NO. CVRP
For use with the V85 Component Video Controller,
the CVRP provides an easy, loss-free way to
terminate Cat-5 wire runs on the back side and a
component video cable on the front. DIP switches
allow you to adjust the video gain level and
contrast based on the length of the Cat-5 wire run.
FEATURES
For use with V85 Component Video Controller
Easy connection of Cat-5 video wire run &
component video cable
DIP-switch configurable for different wire run
lengths
Single-gang, Decora
®
-styling
Available in White
AUDIO/VIDEO WALL PLATES
NEW
FOR
2009
CVWP COMPONENT VIDEO WALL PLATE KIT
SPECIFICATIONS
Send Plate
Input Imp................75 Ohms, 1V pk-pk
(3.4V max)
Output Imp......................50 Ohms
Bandwidth .................450MHz (-3dB)
Channel Separation ..................90dB
Power . . ................16VDC, 1.5A (incl.)
Receive Plate
Input Imp. . . . . . ........50 Ohms, (4.0V max)
Output Imp..............75 Ohms, 1V pk-pk
(3.5V max)
Bandwidth: 150MHz .......(125MHz@500 ft.)
THD .............................-50dBc
Network Gain ........................1.0
Power...............Supplied by Send Plate
Style.................White Decora
®
-style only
ORDER NO. CVWP
The Component Video Wall Plate (CVWP) Kit
extends high –and standard– definition
component video wire runs up to 500 ft. over Cat-
5 cable.The CVWP can be used in any system that
requires component video signals be sent over
long distances, and is the perfect mate to the
S128P Multi-Room A/V Controller.
The CVWP can also be used to distribute local
component video sources, such as DVD players and
satellite receivers, back to the head end for house-
wide distribution through a S128P or other video
switchers.
The CVWP Kit consists of 2 single-gang, Decora
®
-
style wall plates:a SEND plate and a RECEIVE plate.
DIP switches on the RECEIVE plate adjust the video
gain level and contrast based on wire run length.
Both plates also have F-to-F barrel connectors for
routing digital audio over coaxial cable.
FEATURES
Send component video signals up to 500 ft.
w / o signal loss using Cat-5 cable
Ideal for S128P component video
distribution
DIP-switch configurable for different wire run
lengths
Digital coax audio connectors
Single-gang, Decora
®
-styling