Specifications

Accessories
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
94
POWER SUPPLIES
Many of the ELAN products that require external power supplies already have them included in the box.
There are,however, other products where the type of power supply needed is determined by the system’s
configuration.The SPP Precision Panel,for example, might require a PWR4 or PWR10 depending on the
number of VIA!
®
Touch Panels in the system.
ELAN makes a number of these power supplies available for separate purchase.The table below details
their specifications and product-specific applications.
PWR10
PWR4
PWR2
Catalog Output Max. Load Max. Power Output Type Regulated Input Voltage Included with Also for
No. Voltage Current Output Connection use with
PWR1 16 VDC 1.5A 24W Switcher YES 100 to 240VAC CVWP, PVIA1, N/A
VIA!-SR1,
IR LEARNER,
VIA!VALET-10.0EM
PWR2 12 VDC 200mA 2.4W Switcher YES 100 to 240VAC IRKIT IRD4
PWR3 12 VDC 2.1A 25W Switcher YES 100 to 240VAC CAM5000, SIM2, IRD4
SS1, IP8
PWR4 16 VDC 4.3A 68W DIN Switcher YES 100 to 240VAC PVIA4 PS12 w/up
to 4 VIA!s
PWR9 9 VDC 100mA 0.9W Linear NO 120VAC (only) N/A SPP
PWR10 16 VDC 10A 160W Binding Posts Switcher YES 100 to 240VAC N/A SPP, PS12
w / up to
10 VIA!s
PWR12 12 VDC 2.1A 25W Switcher YES 100 to 240VAC PZ600, PVSE VSE2, PZ6
120VAC (only)
NO
Catalog Output Max. Load Max. Power Output Also for
Order No. Voltage Current Output Connection Type Regulated Input Voltage Included with: use with:
RSWP REMOTE SOURCE WALL PLATE KIT
SPECIFICATIONS
Input Level......................0 – 2V RMS
Gain...................+1dB at Source plate,
-1dB @ System plate, 0dB total
Freq. Resp.............20Hz to 20kHz, +/-0.5dB
THD + Noise.......................<0.01%
IR Input / Output Levels..................+12V
IR Bandwidth.......................100kHz
Wire Requirements. ...........(Audio / IR) Cat-5,
(Video) RG-6 Coax
Input Power........................+12VDC
Style.................White Decora
®
-style only
With the RSWP, any A/V source in any multi-room
system can be located anywhere in the house.
The RSWP sends audio and video from any
remotely-located A/V source (e.g. a DVD player in
the Master Bedroom) back down to the head end,
and IR control signals from the head end back to
the source over a single run of Cat-5. Balanced
differential line drivers ensure noise-free audio
from sources located up to 300 ft. from the head
end. IR In/Out jacks on each plate allow for
system-wide control of each source.An RCA-to-F
video connector sends video back to the system
over RG-6 coaxial cable.
Kit includes:
• (1) Source Wall Plate
• (1) System Wall Plate
• (1) IR Emitter
• (1) IR Interconnect Cable
• (2) 1M Stereo Interconnect Cables
• (2) 1M Video Interconnect Cables
• (2) Leviton
®
Frames
• (1) +12VDC Power Supply
ORDER NO. RSWP