Specifications

Power & Ventilation
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
59
Z
•
POWER POWER CONTROLLER
The Z•POWER Controller is a critical hub for both
home theater and multi-room A/V systems,
addressing such needs as surge protection,
sequenced AC switching and multiple triggering
options.
The Z•POWER Controller has eight earth-grounded
outlets.Two current sensing outlets are always on.
Four outlets turn on immediately with a trigger
input.Two more turn on with a programmable
delay.
No other power manager has as many trigger
options.The six switched outlets can be triggered
by the AC current sense of the two “Always On”
outlets, by a remote trigger input,from the
ELAN
®
SENSE sensor input, or by the front panel
switch.Any combination of triggers can be
selected so that multiple sources initiate the turn-
on sequence.
The 12VDC triggered output and a relay contact
closure make it easy to close drapes or lower
screens.The relay output is programmable,
allowing home theater triggered events to close
drapes, but system-triggered events to turn on
sources without closing the drapes!
High-quality transient voltage protection is also
included, with inductive AC line filtering, MOV
Surge Protection, 15A Circuit Breaker, a 2-line
telephone surge suppressor and 1GHz coax surge
suppressor loop-through.
Front Panel LEDs indicate status and fault
monitoring of the AC line.
FEATURES
AC Outlets
2 “Always On” w / Current Sense
4 “Switched” when triggered
2 “Delayed” w / 4 time settings
Switching capacity: 1500W total
Trigger Options
3–24V AC / DC
120VAC Current Sense
ELAN
®
SENSE Input
Combination Sense
Control Outputs
DC @ 100mA remote trigger output jack
Configurable dry relay contact
Power Conditioning & Protection
800 Joule, MOV surge protection
270V clamping level
15dB line noise rejection
15A circuit breaker
Low Voltage Signal Surge Protection
1GHz coax surge suppressor
2 telephone line surge suppressors w /
resetable fuses
Front Panel Features
Master On / Off switch
Trigger option & delay dip switches
LEDs: power, triggered, delay, ground
OK & phase OK
SPECIFICATIONS
Power Requirements.. ............120VAC,12W
Dimensions
Z•POWER
(in.) 17 W x 2-1/4 H x 10 D
(mm) 432 W x 58 H x 254 D
Z•POWERR
(in.) 19 W x 1-3/4 H x 10 D
(mm) 483 W x 45 H x 254 D
Z•POWER/R Weight............10 lbs / 4.5 kg
ETL
®
listed
Also Available in 19 in. Rack Mount Version (Order No. ZPOWERR)
Z•Power Controller Extended Warranty Program
In addition to our standard 2-year warranty against manufacturer’s defects, ELAN Home
Systems will warranty the ELAN products listed below against surge-related damage for a
period of 5 years.The conditions of this extended warranty are detailed in the Z•Power
Controller Operation Manual,and must be met in full for this warranty to apply.The
Z•POWER Controller Extended Warranty Program covers the following ELAN products:
ORDER NO. ZPOWER
Amplifiers
A12
D400 / D401
D660 / D661
Z300 / Z301
Multi-Room
Controllers
S128P
S86P
S86A
S66A
Video
Controllers
V8
V85
Other
ZFAN2 / ZFAN2R