Specifications

IR Systems
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
79
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
For basic IR repeating systems,this one-input by
two-output Passive IR Connection Block provides a
quick and easy means for connecting an ELAN IR
Sensor and two IR Emitters. Current-sharing
resistors at each emitter jack allow any
combination of single- or dual-emitters to be used.
The STATUS input jack allows you to monitor the
ON / OFF condition of systems components (PWR2
Power Supply required for status feedback).
IRD2 PASSIVE IR
CONNECTION BLOCK
IRD4 AMPLIFIED IR
DISTRIBUTION BLOCK
For use with the IRD4, this simple-to-use emitter
expansion block allows you to expand the number
of IR output ports in any system. Connecting the
IRD10 to the high output emitter port of an IRD4
Amplified IR Distribution Block allows you to add
up to ten additional IR emitters per IRD10 to the
system for source control.The IR high-output loop
port of the IRD10 allows you to add up to four
additional IRD10s for a total of 50 emitters.The
IRD10 even comes with a one-foot interconnect
cable for quick and easy connection.
IRD10 PASSIVE IR EMITTER
EXPANSION BLOCK
FEATURES
Connects a single IR output to up to 10 IR
Emitters
Add more Emitters to an IRD4 Amplified IR
Connection Block
Ideal for expanding ELAN IR “ALL”Port
capabilities
Link up to five IRD10s using the high-output
loop port
1-foot 3.5 mm “mini”plug interconnect
cable (incl.)
Non-retail packaging
FEATURES
Quick & easy connection for 1 ELAN IR Sensor
& 2 ELAN IR Emitters
Great for basic IR repeater systems
STATUS input jack tells if system is ON or OFF
Quad “mini” plug-to-mono “mini” plug cable for
ELAN controller IR output port applications (incl.)
Strong adhesive backing for mounting on any
flat surface
Non-retail packaging
IR DISTRIBUTION
Sensors “receive” IR data. Emitters “transmit” IR
data. So how does one get this data from point A
to point B? Quite easily, actually.In addition to
offering a complete line of multi-room controllers
that route IR to and from any room in the house,
ELAN offers a line of stand-alone IR Distribution
blocks for use in any stand alone application.
The ELAN IRD4 is the heart of any stand-alone IR
distribution system.This amplified IR distribution block
can connect quad-plug or bare-lead ELAN IR Sensors
in one or more rooms and output their signals to up
to four IR emitters.The IRD4’s robust, wide-bandwidth
amplifier incorporates reverse voltage protection so
that it has the ability to drive both miniature and high-
output emitters simultaneously.And the IRD4 is
expandable! Up to ten IRD4s can be linked together
to create a distributed IR system that encompasses
every room in the house.
Note: only 3.5 mm quad “mini” plugs can be
connected to the 3.5 mm IR Sensor input jack of
the IRD2. If the IRD2 is to be connected to the IR
output of any other ELAN product, use only the
3.5 mm quad-to-mono interconnect cable
included with the IRD2.
Note: only 3.5 mm quad “mini” plugs can be
connected to the 3.5 mm IR Sensor input jack of
the IRD4. If the IRD4 is to be connected to the IR
output of any other ELAN product, use only the
3.5 mm quad-to-mono interconnect cable included
with the IRD4.
ORDER NO. IRD2
ORDER NO. IRD10
ORDER NO. IRD4
FEATURES
1 box–everything you need!
Kit includes:
• (1) IRS5 CFL friendly tabletop IR Sensor
• (4) IRE2 “talk back” IR Emitters
• (4) IR Emitter Shields
• (1) IRD4 Amplified IR Distribution Block
• (1) Quad “mini”plug-to-mono “mini”plug
cable for ELAN controller IR output port
applications
• (1) PWR2 12VDC / 200mA Power Supply
Full-color retail box standard
With full-color retail packaging standard, the
IRDKIT is the ideal off-the-shelf product for
consumers who like to “do-it-themselves”.The
IRDKIT contains everything needed for a basic IR
repeater system – a tabletop IR sensor, four IR
emitters and the IRD4 Amplified IR Distribution
Block with power supply.
IRDKIT IR DISTRIBUTION KIT
ORDER NO. IRDKIT
FEATURES
Amplified hub for stand-alone IR distribution
systems
Easy connection of both quad-plug & bare-lead
ELAN IR Sensors
4 output jacks handle both high- & low-output
IR emitters
Expandable! Link up to 10 IRD4s together for
large systems
Mounts on any flat surface (mounting screws incl.)
Quad-to-mono “mini” plug cable incl.for ELAN
controller applications
Requires PWR2 or PWR3 Power Supply,
depending on scope of system
Full-color retail box