Specifications

Structured Wiring
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
86
SPECIFICATIONS
Typical @ 77°F ± 50°F (25°C ± 5°C)
Output run distance 150 ft. 75 ft.
Forward Gain: 4dB 1dB
Reverse Gain: -8dB -12dB
Bandwidth:
Forward ......................54-806MHz
Reverse ........................5-42MHz
Max CATV / Ant input (64 ch)..........20dBmV
Power supply...........15VDC @ 300mA (incl.)
The VDA16B can route CATV or antenna signals to up
to six TVs and features outputs for four short runs and
two long runs.The broadband 54-806MHz amplifier
and 5-42MHz reverse channel is compatible with pay-
per-view, interactive cable and cable modems.
FEATURES
1 x 6 bi-directional RF amplifier
Reverse channel compatible w / pay-per-view,
interactive cable & cable modems
Independent outputs for long & short cable runs
6 grid spaces
VDA16B 1x6 BI-DIRECTIONAL RF DISTRIBUTION AMPLIFIER
ORDER NO. VDA16B
VDA38H3x8 HIGH-HEADROOM RF DISTRIBUTION AMPLIFIER
The VDA38B is the heart of any RF distribution
system.This three-IN by eight-OUT bi-directional
RF distribution amplifier connects as many as eight
televisions to cable or antenna while maintaining
optimum signal strength to all TVs.The VDA38B is
perfect for bi-directional cable systems, providing a
5-42MHz back channel for cable modems or
interactive set-top boxes.
VDA38B 3x8 BI-DIRECTIONAL RF DISTRIBUTION AMPLIFIER
RF DISTRIBUTION PRODUCTS
Have access to all video from anywhere in the home. Each and every room can display high-quality
video from VCRs, satellite receivers,TVs,cameras and more, using these RF “distribution” products.
FEATURES
3 x 8 RF distribution amplifier
High-headroom for off-air antenna applications
Transmits IR down coax for local source control
5 grid spaces
SPECIFICATIONS
Gain:
CATV / Antenna port to output ............3dB
Modulator input to output. ............-10dB
Isolation ............................>80dB
Modulator input to CATV / Ant . . . 5-1000MHz fwd
Max CATV / Antenna input ....20dBmV (+85dBuV)
Power supply ............15VDC @ 300mA (incl.)
The VDA38H is a three-IN by eight-OUT high-
headroom RF distribution amplifier for antenna or
uni-directional cable systems. It offers the highest
headroom of any coax panel available on the
market. Like the VDA38B, the VDA38H connects
as many as eight televisions to cable or antenna
while maintaining optimum signal strength to all
TVs. It also has the capability of sending IR down
each coax run for control of local TVs or video
source components.
FEATURES
3 x 8 RF distribution amplifier
Bi-directional – ideal for cable systems,
cable modems or interactive set-top boxes
5 grid spaces
SPECIFICATIONS
Gain:
CATV / Antenna port to output ..........3dB
Modulator input to output ...........-10dB
Output to CATV (reverse) .............-15dB
Isolation............................>35dB
Modulator input to CATV / Ant......54-1000MHz
forward, 5-42MHz reverse
Max CATV / Ant input .......20dBmV (+85dBuV)
Power supply ............15VDC @ 300mA (incl.)
ORDER NO. VDA38B
ORDER NO. VDA38H