Installation manual

© ELAN Home Systems 2002 • All rights reserved. 3/02 Page 9
ELAN HOME SYSTEMS
INSTALLATION MANUAL
CONNECTIONS
Z•600 CCOMM CCONTROLLER CCONNECTIONS
REAR PANEL CONNECTIONS
TELEPHONE SERVICE AND HOUSE CONNECTIONS
1. On the rear panel of the PZ6, connect the incoming telephone service’s
TIP and RING to the TIP TELCO and RING TELCO terminals on the
PZ6’s TELCO punchdown connector.
2. Connect TIP PHONE and RING PHONE terminals on the PZ6’s TELCO
punchdown connector to the appropriate line on the telephone punch-
down block.
DOOR SPEAKER ASSEMBLY CONNECTIONS
There are two punchdown connectors on the back of the PZ6 for the connection
of ELAN Door Speaker Assemblies (labeled DOOR SPEAKER 1 & DOOR
SPEAKER 2). The Z•600 may access each of the door stations independently.
NOTE: For additional information, see the Z•600 Comm Controller’s Users
Manual.
INSTALLATION TIP
Use the color-code
overlay to ensure cor-
rect Door Speaker
Assembly connections.
Series II
BRAND X
ELECTRONIC
DOOR LATCH
MECHANISM
DOORLATCH
POWER
SUPPLY
ELAN DSC2000 (rear)
22/24 AWG 4-TWISTED
PAIR W/ SHEILD
(Cut drain wire flush)
DOORBELL
BUTTON
(INCLUDED)
PZ6RM Door
Speaker Connector
Blue
Wh/Blue
Orange
Wh/Orange
Green
Wh/Green
Brown
Wh/Brown
M+
M-
*DB-
L+
L-
DB+
DS+
DS-
*NOTE: Punchdown the stranded DRAIN wire first, then
punchdown the Orange DB- wire on top of it
DOORBELL BUTTON
(INCLUDED WITH DSC2000)
PZ6