Installation manual

ELAN HOME SYSTEMS

INSTALLATION MANUAL

RJ-445 PPIN OOUT

Should you prefer to terminate your own RJ45 cables, refer to the diagram

below for the correct pin-out.

PZ6 PPUNCHDOWN CCONNECTORS

The back of the PZ6 uses standard 110 punchdown connectors for all

Z•System wire runs (with the exception of speakers and coax). Wires do not

need to be stripped prior to punchdown as the insulation will automatically be

displaced, and each punchdown row will accept two 24 or 22 AWG solid con-

ductor wires. Use of a 110 punchdown tool is recommended.

CONNECTIONS - CONT.

Series II

NOTE: The PZ6 also comes with

Punchdown caps to ensure that

wiring connections won’t come

loose.