2.4GHz Wireless Digital Audio Pocket Receiver USB & Line-in 2 in 1 Transmitter Before operating the units, please read this manual thoroughly.
GENERAL SAFETY SUMMARY CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: DO NOT REMOVE THE COVER FOR REDUCING THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent fire or shock hazard , do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS 1. All the safety and operating instructions should be read before the product is operated. 2.
9. Unplug the USB transmitter from the computer and refer servicing to qualified service personnel under the following conditions. When the computer or USB transmitter is damaged. If liquid have been spilled, or objects have fallen into the computer.
Table of Contents Overview .......................................................... Features ....................................................... Package Contents .................................... Names of parts .......................................... Getting Start ................................................... Operations ....................................................... Trouble Shooting ........................................ Specification ............................................
Overview The 2.4GHz Wireless Digital Audio uses the latest wireless technology to transmit crystal-clear audio in a digital format. The pocket size receiver is easy to carry and the transmitter has two way to decide Audio source. It makes you enjoy the true CD quality by eliminating the hassle of wire, and allows you to experience your favorite music where it belongs - on your stereo.
Package Contents Check the package before you enjoy the product. (X1) USB cable (X1) Pocket receiver (X1) RCA cable USB / Line in Transmitter (X1) 1.
Receiver Strap eyelet LED(blue) Power Power off ( Tact switch ) LED(orange) Link Power on Battery compartment cover Volume control ( ) Phone jack Channel selector Getting Start 1. Open the battery compartment cover of receiver. 2. Insert 2X AAA batteries into battery compartment. Make sure the plus and minus poles of battery was correctly touched their contains. 3. Close the battery compartment cover.
4. Installation of earphone and Receiver Pierce through Screw on Screw off 5. Audio source to transmitter 5.1 Audio source(PC or Notebook):Connect the transmitter to audio source with USB cable. PC Notebook 5.2 Audio source( DVD,VCD,CD,DAB Mp3):Connect the transmitter to audio source with RCA cable. 6. With power adaptor plug the transmitter into standard electric outlet.(If Audio source is from PC or Notebook, you don’t need to plug with power adaptor.) Operations 1.
Trouble Shooting Please read this users manual carefully before using the Wireless Audio Product. If you still have difficulties to use the product, consult the following syndrome, which will guide you to solve most common problems. No Sound 1. Check the adaptor rightly connected. 2. Check the batteries are in full electric power. 3. Power On/Off switch is in right position. 4. Check all the cables well and rightly connected. 5. Check Transmitter and Receiver at the same channel. Having Interference 1.
Specification Specification Item Description Supply voltage Current consumption Transmitter Receiver 1.2 or 1.5V AAA battery x2 120 mA @2.4VDC (Typical) USB power or 9VDC 100 mA (Typical.) Operating temperature -10 C ~ +60 C Frequency range 2400 ~ 2483.5 MHz Modulation FSK (Modulation Index 0.
6060409015-11