User's Manual

6. Push the button left (volume down)or
right ( volume up) to adjust volume.
Volume control
7. Press the button to choose Receiver's
Channel the same as Transmitter.
The power/channel indicator LED will
flash in green to indicate channel
number.
Channel I : Flash once
Channel II : Flash twice
Channel III : Flash thrice
Channel IV : Flash quartic
OR press and hold the channel button
two seconds to scan the channel.
Select the channel
8. Push down and HOLD the button two
seconds to switch into audio mode
(Audio mode: To Turn off the LCD monitor
for power-saving.)
9. Push down and HOLD the button two
seconds again to turn back A/ V mode.
Audio mode
Continue.....
6