User's Manual

4
Continue.....
8.
When DV 9V Plug in Jack, the Battery
power will Auto switch off.
7.
Slide the ON/OFF Switch to the ON position.
Then, plug the AC Power Adaptor into a standard 120V /230V
AC electrical outlet.
6.
OR connect the AC Power Adaptor into adaptor jack.
NOTE: Make sure to move the batteries out of battery
compartment before plugging AC Power Adaptor.
OR
Please use 9V ALKALINE Battery for battery source.
5.
4.
Zip back of the Bear Camera and pull out of the battery zoom.
Put a 9V battery into battery compartment.
NOTE: Reference the "Handheld LCD Monitor" section to update the receiver channel
selection.
Securely reattach the Channel Switch rubber grommet onto the video camera base.
Use a small, blunted, pointed object to slide Channel Switch inside of the base
opening, as desired (Channel 1-4)
Remove the Channel Switch rubber grommet from the Bear video camera front
base. (Refer to the diagram in the " Controls" section.)