User manual

ELARA 7371000 25.9.98 Page 13
Preset Mode
Timed Crossfades between Scenes
1. Set the A MASTER and B MASTER
to zero.
2. Set up a scene using the PRESET A
faders.
3. Set up a different scene on the
PRESET B faders.
4. Set the CROSSFADE control to the
time required to fade scene A in.
5. Quickly move the A MASTER to full.
The scene on the PRESET A faders
will fade in and be output live. (The
time taken for the fade to complete is
determined by the value set on the
CROSSFADE control). The red
FADING light will flash while the
dipless crossfade is taking place, and
go out when the crossfade is
complete
6. To crossfade to the scene on
PRESET B, quickly move the
A MASTER to zero and the
B MASTER to full. The scene on
PRESET B will fade in and the scene
on PRESET A will fade out in the
selected time. The red FADING light
will flash while ss crossfade is taking
place.
7. A new scene can then be set up on
PRESET A without affecting the
outputs.
8. To crossfade to the scene on
PRESET A, quickly move the
A MASTER to full and the B MASTER
to zero. The scene on PRESET A will
fade in and the scene on PRESET B
will fade out in the selected time. The
red FADING light will flash while the
dipless crossfade is taking place, and
go out when the crossfade is
complete.
Flashing Channels
1. Ensure that the FLASH FUNCTION is
active.
2. Press and hold an individual
CHANNEL FLASH button. (Those
below the PRESET A faders or
PRESET B faders can be used). The
channel is then added to the scene at
the level set on the GRAND
MASTER.
3. Release the CHANNEL FLASH
button. The channel returns to its
previous level.