User manual

Wide Operation
In WIDE the user is able to crossfade
between, or combine two scenes which
are 24 channels wide.
A scene is set up using the PRESET A
and PRESET B faders (PRESET A faders
control channels 1 -12, PRESET B faders
control channels 13 - 24). This scene is
then stored temporarily by pressing the
PRESET CONTROL button. A second
scene can then be set up on the PRESET
A and PRESET B faders. The A MASTER
and B MASTER faders can then be used
to crossfade between the two scenes.
The PRESET CONTROL button is used
to control which master has control of the
PRESET channel faders and the stored
scene. The GRAND MASTER is used to
control the final output levels from the
desk. The CROSSFADE control is used
to determine the crossfade time between
the two scenes.
Setting up for Wide Operation
1. If the desk is not already in PRESET
Mode, press and hold the MODE
button for 1 second. The PRESET
light above the MODE button will
come on.
2. Ensure WIDE is active. On first
invoking WIDE or re-entering WIDE,
the PRESET faders will be assigned
to the A MASTER, and the stored
scene assigned to the B MASTER.
The lights next to the PRESET
CONTROL button will indicate this
(A FADERS, B STORED). The
temporarily stored scene will be
cleared.
Page 14 ELARA 7371000 25.9.98
Preset Mode