User manual

ELARA 7371000 25.9.98 Page 19
Memories and Sequences
Both SCENE memories and
SEQUENCES can be programmed on the
Elara desk.
A SCENE memory consists of a single
static state, recording the output level of
each channel.
A SEQUENCE consists of a number of
steps (max 99). Each step is a previously
programmed scene memory. The same
scene memory may be used in more than
one step of a sequence and more than
one sequence.
Programming Memories and
Sequences
The desk provides 48 programmable
memories, which are accessed as two
pages of 24 memories. The MEMORY
PAGE button is used to select the
required page. The CHANNEL FLASH
buttons are used to select the memory.
The yellow lights in the CHANNEL FLASH
buttons are use to indicate which
memories have been programmed. The
PRESET faders are used to set the output
levels and the PROGRAM button used to
save the levels to memory.
The desk also provides 3 programmable
sequences. The SEQUENCE buttons are
used to select the sequence, and the
MEMORY PAGE and CHANNEL FLASH
buttons used to program the required
memories into each step.